Genuine Carbon Fibre parts for BMW

[carbonfootprint 0]

Hey all,

I make Carbon Fibre/Kevlar bits (no fibreglass) and pieces for cars (primarily) and I'm looking to

make some BMW parts.

If anyone is keen to supply parts to make moulds off (or if their is enough demand for a

certain piece I can probably source my own) then let me know.

I like making custom parts if there is a certain thing alot of people want.

I do this as a hobby more than anything from home so I tend to be a little cheaper than imported gear.

I've attached some of my latest work, Carbon + Titanium mirrors

Cheers

Chris

Enquires 021 252 9806

Edited December 17, 2007 by carbonfootprint

[Andrew 30]

Rough price on Bonnets, boots, doors, sidepanels.

I'm sure you'd sell a few to us racing people.

[NZ POM 0]

Good timing mate, i was just surfing looking for carbon interior stuff for my E36 and some m3 carbon mirrors,

i'll be keen to supply a couple of trim bits

[Guest Rick James]

Bonnet

Bootlid

Functional sunroof

Interior bits that are coated in c/f would be cool (just for the look I guess)

Numberplate surround (thinking mainly for FL E30's)

C/F model designation badge (cut out of C/F - blingtastic)

[international 0]

Bonnet

Bootlid

Functional sunroof

Interior bits that are coated in c/f would be cool (just for the look I guess)

Numberplate surround (thinking mainly for FL E30's)

C/F model designation badge (cut out of C/F - blingtastic)

Bonnet for sure...and Boot lid for E36

[Nobimmer 694]

agreed with sam,model number in CF would be badass

[Mike 1]

some interior bits like speaker mounts would be cool. I'm mainly thinking tweeter mounts for the doors by the mirrors?

[jpp 0]

E30 iS lip?

[Gus 5]

that mirror looks really nice..mind me asking how you make them? do you vacuum bag from a mould? have done a little bit of glass/carbon work with boat building, but that is another league entirely

[ED1RTY 2]

Gus, you still got that template for the carbon airbox?

Id be interested in one of those. Failing that i could make a cardboard stencil and post it to you?

[3series 0]

What part of the country you in?

[antony 0]

this one?

[ED1RTY 2]

Yea cheers

Haha couldnt be f'd searching

Edit: Also be keen to get a carbon guage cluster surround, like the plastic bit that holds it in on E30, can supply the part for mould.

Edited December 17, 2007 by Mc Lovin'

[skyline_400r 0]

how about some E46 parts? =D

custom made front lip for non-M bumpers

CSL style boot for 4dr and 2 dr? or even jst the CSL style rear spoiler?

carbon side skirts perhaps?

Edited December 17, 2007 by skyline_400r

[international 0]

how about some E46 parts? =D

custom made front lip for non-M bumpers

CSL style boot for 4dr and 2 dr? or even jst the CSL style rear spoiler?

carbon side skirts perhaps?

Carbon grills?

[carbonfootprint 0]

Okay...lets see;

Rough price on Bonnets, boots, doors, sidepanels.

I'm sure you'd sell a few to us racing people.

As I haven't made BMW bits before I can't comment with great accuracy regarding these parts esp doors and panels. If they are not to different from the norm expect;

*Full CF bonnet $1000-1500 (with the need for 4 bonnet pins so bonnet is completely removable. fashioning hinges can take longer/cost more but I personally think 4 pins looks better anyway)

*Panels $500+

*Doors - depends on spec, full carbon door without cards and say plastic windows I would guess-tamate $600-1500 each

Good timing mate, i was just surfing looking for carbon interior stuff for my E36 and some m3 carbon mirrors,

i'll be keen to supply a couple of trim bits

Sure thing, If anyone lets me use their parts I'll make it cheaper for them. Any small bits you need (mirrors etc) I would be keen to get a hold of them asap as they tend to be the most fiddley and moulds can take longer to sort

that mirror looks really nice..mind me asking how you make them? do you vacuum bag from a mould? have done a little bit of glass/carbon work with boat building, but that is another league entirely

Spot on - some things are infused but if you are a careful I believe wet lay-up can still out perform it. Usually the parts undergo 5 to 6 heat cycles to harden the epoxy. See attachment, this is a mirror top half.

What part of the country you in?

Gulf Harbour - north of Auckland

Yea cheers

Haha couldnt be f'd searching

Edit: Also be keen to get a carbon guage cluster surround, like the plastic bit that holds it in on E30, can supply the part for mould.

Happy to collect it and get going, if you're local of course!

how about some E46 parts? =D

custom made front lip for non-M bumpers

CSL style boot for 4dr and 2 dr? or even jst the CSL style rear spoiler?

carbon side skirts perhaps?

Should be no drama, I'll just need to have a look first. Do you have parts?

Carbon grills?

Might be tricky but again, I can have a look.

Note:

Usually 'mint' parts are prefered for moulds but dont stress too much - the moulds can be shaped, imperfections removed - it just takes a little time!

Gimme a call/txt/email or post reply to oraganise - cheers

Chris

021 252 9806

[email protected]

[skyline_400r 0]

with regards to the e46 parts

sorry, no, i don't have the parts

[carbonfootprint 0]

with regards to the e46 parts

sorry, no, i don't have the parts

Well if anyone does, let me know - cheers

[hybrid 1043]

keen on a carbon e30 bonnet. Would want a hinged arrangement. need it to match the carbon dtm boot and blade.

Am a wee way off ordering it as the body section of the e30 project will be later 08.

[carbonfootprint 0]

keen on a carbon e30 bonnet. Would want a hinged arrangement. need it to match the carbon dtm boot and blade.

Am a wee way off ordering it as the body section of the e30 project will be later 08.

No probs, flick me an email to discuss you requirements/establish pricing etc

[email protected]

Chris

[David 0]

keen on a carbon e30 bonnet. Would want a hinged arrangement. need it to match the carbon dtm boot and blade.

Am a wee way off ordering it as the body section of the e30 project will be later 08.

I am also keen on a carbon e30 bonnet.

[carbonfootprint 0]

I am also keen on a carbon e30 bonnet.

As above, send me an email or txt to discuss

[email protected]

021 252 9806

Cheers