Andre3000 55 Report post Posted July 13, 2008 Any tips to replacing the bonnet roundel on my e30? Do i just use a heat gun? And what do i use to put the new one on? I was driving up in riverhead last weekend when my badge flew off. At the time i thought it was just a leaf but the next morning i noticed my roundel was missing. The silver attaching thingy is still on the bonnet but no trace of a badge. Cheers Andrew Quote Share this post Link to post Share on other sites
silvermace 0 Report post Posted July 13, 2008 Mine fell off in a carwash, I popped down to Bunnings and got me some "HEVCO 502 Super Glue" and it worked a charm - this stuff is really really low viscosity, so took 2 or 3 goes to actually use it right (I initially thought i got ripped off, but 3rd time was a charm) badge is well stuck-on now. Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted July 13, 2008 i have some . they just have 2 plastic dowls that push into the bonnet . 021433600 Quote Share this post Link to post Share on other sites
Yuen 16 Report post Posted July 13, 2008 Heat gun??? Glue??? Don't do that to your cars guys! The roundels have 2 pins on the back and are held into the holes on the bonnet/boot by two plastic grommets that slide onto the pins so as to ensure a snug fit. To remove, just use a flat head screwdriver. PS: Cover the screwdriver tip with some electrical tape and put a cloth beneath the levering point so you don't dent the panels or damage the paint. Quote Share this post Link to post Share on other sites
mtk540 3 Report post Posted July 13, 2008 i have some . they just have 2 plastic dowls that push into the bonnet . 021433600 Brent do you have a rear badge for a 1999 E39 at a good price? The ones on TM are a bit steep!The high pressure hose at the car groomer blew off the enamel and left me with a nice silver roundel and the BMW etching - mind you it was cracked so I was just waiting for it to happen. Mike Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted July 14, 2008 Brent do you have a rear badge for a 1999 E39 at a good price? The ones on TM are a bit steep! The high pressure hose at the car groomer blew off the enamel and left me with a nice silver roundel and the BMW etching - mind you it was cracked so I was just waiting for it to happen. Mike yes .call ah 021433600 Quote Share this post Link to post Share on other sites
Andre3000 55 Report post Posted July 17, 2008 Heat gun??? Glue??? Don't do that to your cars guys! The roundels have 2 pins on the back and are held into the holes on the bonnet/boot by two plastic grommets that slide onto the pins so as to ensure a snug fit. To remove, just use a flat head screwdriver. PS: Cover the screwdriver tip with some electrical tape and put a cloth beneath the levering point so you don't dent the panels or damage the paint. Thanks for the help, iv studied the badge a bit further and it looks to be that simple in the end. Cheers Andrew Quote Share this post Link to post Share on other sites
