Jump to content
Sign in to follow this  
sidewaysnupsidedown

project E30 - m50b25t

Recommended Posts

YO IM NEW TO THE FORUM

so after a bit of a break since my last beemer i decided to get another e30 cos i never got over the shape, tuff as nails.

ended up swapping my old subaru project for a 320i manual i not too bad condition.

got it home and had a week left of holidays to do tidy it up before returning to wellington for uni.

so far my progress has been:

got it back to vtnz warrentable std (for the freindly nzpd's sake)

-shortened back shocks 110mm so springs were captive

-new tyre

-took off tints and black tail lights (which were put back on no sooner than i was round the corner)

-fixed rust hole in boot and gaurd

she was a bit rough so i also

-exterior re-spray in a slightly creamier version of factory alpinweiss (only so i didnt have to do a full strip back)

-lowered the front to match the back

-brand new fixed back buckkies in the front as std seats had springs coming out!

-olskool sportline steering wheel

-fixed up the dodgy stoner wireing for the sounds and got new 1700w amp for the subs

got her all fixed up just in time, and a couple of weeks ago just put on brand new white/polished euro style rims, to replace the tacky chromes.....

enjoyed it for a bit as a cruiser but now i miss having power on tap, so the plan is

-an m50b20 or b25 twincam motor

-turbo or vortech supercharger

-and full adjustable suspensin incl. coilover rears

and probably more ideas to come....

cheers let me know what yall think!

post-3339-1219473061_thumb.jpg

post-3339-1219473075_thumb.jpg

post-3339-1219473092_thumb.jpg

post-3339-1219473109_thumb.jpg

post-3339-1219473137_thumb.jpg

post-3339-1219473167_thumb.jpg

post-3339-1219473184_thumb.jpg

post-3339-1219473196_thumb.jpg

Share this post


Link to post
Share on other sites

Rims suit it good, die chromes

Share this post


Link to post
Share on other sites

Welcome, good stuff mate!

I must have misunderstood, but you did all that in a week?

Sweet rims, look the biz on white car.

Go for a M50B25 I reckon- same weight, more power. You may regret it later on if you don't.

Edited by Quailboy

Share this post


Link to post
Share on other sites

Welcome, good stuff mate!

I must have misunderstood, but you did all that in a week?

Sweet rims, look the biz on white car.

Go for a M50B25 I reckon- same weight, more power. You may regret it later on if you don't.

cheers for the comments guys, yea i spied the rims on trademe, theyre just cheap import ones but i thought theyd suit it alright, and yer im stoked with them, would be mean to upgrade to 18s tho.

yes you read right, did those things in a week! maybe they seem a bit more in writing tho, it wasnt really much trouble haha. third car ive painted myself and first time shooting with a 2k so i was stoked a the result.

i guessed the b25 would be the better option, no substitute for cubes aye.

anyway ill keep yous updated, hopefuly doesnt take me too long to get some cash saved up and get my sh*t together....

oh and at the moment this beemer is my inspiration, check it out its pretty insane...http://www.dtmpower.net/gallery/photos.php?ID=105

Share this post


Link to post
Share on other sites

Keep your options open. If your going to go to all the trouble of fitting a M50B25 why not go for a M52B28 manual conversion, if the oportunity arises. Same amount of work, and more grunt :P

Keep your eyes open for a damaged E36 M52B28

Share this post


Link to post
Share on other sites

Keep your options open. If your going to go to all the trouble of fitting a M50B25 why not go for a M52B28 manual conversion, if the oportunity arises. Same amount of work, and more grunt :P

Keep your eyes open for a damaged E36 M52B28

yea good idea man, mines already manual, but i could definately do with a new gearbox if im guna start puttin more power thru it.

cheers

Share this post


Link to post
Share on other sites

yea good idea man, mines already manual, but i could definately do with a new gearbox if im guna start puttin more power thru it.

cheers

E30 gearbox does not fit an E36

Share this post


Link to post
Share on other sites

yep its exactly 100mm front and rear to the lowest structural bit. they didnt even check the height at vtnz! but ive been pulled over a few times and had to prove it wasnt too low, with the help of my handy 100mm block of wood i keep in the glovebox hahaah.....

Share this post


Link to post
Share on other sites

just been browsing thru some threads on http://forum.e46fanatics.com,

and dayymm im starting to re-think my wheels!! i like what ive got now but i wanna go WIDE and get some mean strrrrreeeetch!!! just wondering if anyone has seen an e30 with modgies? im thinking itd look tough as, like 13x8's or something or maybe custom made rims, ive seen a set of 13x12's on the back of a rota van haha hows that for paws.

so yea added to my list of mods to come, wiiiiide rims+lo pro stretched rubber and definately bolt on or re-made flares.

ps: IMO wide body e30=pooos

pss: heres some of the pics that coaght my eye

post-3339-1219717779_thumb.jpg

post-3339-1219717789_thumb.jpg

post-3339-1219717795_thumb.jpg

post-3339-1219717801_thumb.jpg

post-3339-1219717826_thumb.jpg

post-3339-1219717831_thumb.jpg

post-3339-1219717837_thumb.jpg

post-3339-1219717852_thumb.jpg

Share this post


Link to post
Share on other sites

Have to say thats a new hot look with the white face and polished lip, wonder if they make style ones in 20"

Share this post


Link to post
Share on other sites

Yea they all look awesome a, but it's hard/expensive to find wheels like those on New Zealand.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...