tight squeeze

[pureboiracer 0]

got my turbo manifold sitting on the e30 now. saving for the turbo. it will be a t3. but the small issue is where will i put the downpipe. included sum pictures. have about 2" or so either side of the steering collum. anyone got any ideas?

[Mike 1]

pic doesn't work for me, but you can squeeze a 3" pipe between the motor and the steering column

[pureboiracer 0]

not with this manifold you cant. there is no more than 6cm either side of the steering collum

[CamB 48]

Pic doesn't work for me either.

[320guy 0]

You can also fit a 3" pipe between the steering column and the body.

Stop making excuses!

[pjay 8]

Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information.

The error returned was:

Sorry, but you do not have permission to use this feature. If you are not logged in, you may do so using the form below if available.

[m&ttaur 0]

got my turbo manifold sitting on the e30 now. saving for the turbo. it will be a t3. but the small issue is where will i put the downpipe. included sum pictures. have about 2" or so either side of the steering collum. anyone got any ideas?

Hi did you get your e30 finished? I have one of those manifolds and had to modify the 2 rear port pipes? but now i have found the chinese guy who welded it welded the flange on upside down!!!! was yours right and did you get it from driven performance?

[dubman 39]

the pic is HUGE and wont auto resize down.

[e30ftw 410]

Hi did you get your e30 finished? I have one of those manifolds and had to modify the 2 rear port pipes? but now i have found the chinese guy who welded it welded the flange on upside down!!!! was yours right and did you get it from driven performance?

I got mine from there and it fit and worked fine, managed to get a 2.5" pipe between the gap above too using the same manifold