Rear Sway Bar Mounts E30

[tibbs.james 1]

Hi Guys

I Have acquired a 325 Rear sway bar complete with bushings & links

However i need the metal bits that go over the bushings and clamp the swaybar to the chassis.

Its the bit that looks like this

Edited October 12, 2008 by Jimmy

[tibbs.james 1]

Bumpity

Need a set of these so i can put my swaybar on

Even if i could borrow one so i could make a drawing of it and have it made for me.

[CamB 48]

You can possibly buy generic ones (eg Noltec ones from BNT) and new bushings, and adapt. Look in the catalogue for universal sway bar mounts and bushings.

Edited October 16, 2008 by CamB

[tibbs.james 1]

http://store.nexternal.com/shared/StoreFro...155880153&C

This is the reinforced Mount From IE

I might just have a measure up under the car and have a couple of these made for me

They look pretty easy to whip up on Auto cad, at least i would mean i could run a larger sway bar later if i decided the 325 one wasn't enough.

It would still be easier getting some stock ones since my rubber bushings look like brand new & i would rather put money into getting my front koni's on the car

Edited October 16, 2008 by Jimmy

[Apex 693]

I wouldn’t have thought them to hard to find, a wrecker should have a few.

BMW would sell them no doubt, why not try them?? I found there pricing more reasonable than expected.

[HELLBM 1557]

Have plenty.

Ray

0212HELLBM

[drifty325i 0]

If you have trouble getting them mate im sure i can sus some from a mate this weekend. If you can give me a hand with the subframe we should shoot out to his place and grab them

Riley

[tibbs.james 1]

Check Pm's Riley

Ray

Will give you a call if i can't get some from Riley's mate

Thanks guys