Jump to content
Sign in to follow this  
haydenz

E34 M50B25 ticking!

Recommended Posts

Ok. I will start off with a little bit of history about my 1991 525i E34.

Vehcile was frequently serviced by its first New Zealand owner.

Nothing went wrong with the car when the previous owner had it.

I purchased the car at 148,000k's in August 2008.

Since I have owned the car, I have had to replace the following:

  • Water pump
  • Thermostat
  • Break light switch
  • Radiator
  • Alternator
  • Automatic Transmission (Jatco)
  • Idler
  • Battery
  • Radiator hose

I am now getting a ticking noise from my M50B25 engine!!

Sounds like a diesel vehicle while idling!

It seems to dis-appear once the vehicle is up to about 2500rpm.

Any suggestions?? I'm sick of paying for things to be fixed and being ripped off as I am not a car person.

Share this post


Link to post
Share on other sites

Ok. I will start off with a little bit of history about my 1991 525i E34.

Vehcile was frequently serviced by its first New Zealand owner.

Nothing went wrong with the car when the previous owner had it.

I purchased the car at 148,000k's in August 2008.

Since I have owned the car, I have had to replace the following:

  • Water pump
  • Thermostat
  • Break light switch
  • Radiator
  • Alternator
  • Automatic Transmission (Jatco)
  • Idler
  • Battery
  • Radiator hose

I am now getting a ticking noise from my M50B25 engine!!

Sounds like a diesel vehicle while idling!

It seems to dis-appear once the vehicle is up to about 2500rpm.

Any suggestions?? I'm sick of paying for things to be fixed and being ripped off as I am not a car person.

quite comon for the hydrolic lifters to get noisey .

changing the oil can somtimes quieten them down a bit .(is it louder when first started?)

otherwise i think you have to replace them . i have spares if needed.

cheers brent

Share this post


Link to post
Share on other sites
Guest FrantiC

Exhaust leak can do similar, especially if it is coming from the manifold off the head or at the downpipe flange.

Share this post


Link to post
Share on other sites

quite comon for the hydrolic lifters to get noisey .

changing the oil can somtimes quieten them down a bit .(is it louder when first started?)

otherwise i think you have to replace them . i have spares if needed.

cheers brent

check if all spark plugs are tight

Exhaust leak can do similar, especially if it is coming from the manifold off the head or at the downpipe flange.

Thanks for your help guys!

It just fixed itself?!?! Good enough for me!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...