E30-323ti 66 Report post Posted February 1, 2005 Hi Darren, The biggest E36 rotors are 315x28mm (M3's $240ea (not-floating ones)) E46 rotors fit (same offset) the bigger 2 being 330i @ 325x25mm ($125ea = cheap) and the M3 @ 328x28mm ($500ea = not cheap!!). I'm using TT JZA80 supra rotors 324x30mm ($125ea = V.cheap), slightly less offset than the bmw ones (50mm), but alot thicker than the 330i rotors and they are directional "for increased cooling" bullshit!! Just had to drill a 2nd set of holes @ 5x120 & increase to the centrebore to suit. I will prolly use the 330i front rotors on the rear when I put the 4pots on. Got that ECU in yet?? Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted February 2, 2005 cheers for that ,don't think it will be in for awhile i gotta sell the 4age bmw to free up abitta cash then il get it alsortd,autronic doesnt have a base program so ive gotta be prepared to pay for tuning once its installed and i need bigger injectors ,heavier clutch maybe ,blah ,blah one thing after another, ill keep you posted Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted March 15, 2005 Well ive sold the autronic cos it was going to be a bit of a mish to run the sr20 with individual coils so im getting a link plus which suits my budget and will do what I want it to.Got some nizzmo 740cc injectors so heres hoping it will be in soon and tuned cos I wanna enter that burnout comp on the 1st of april but the month is going fast!! Quote Share this post Link to post Share on other sites
Guest Andrew Report post Posted March 16, 2005 Well ive sold the autronic cos it was going to be a bit of a mish to run the sr20 with individual coils so im getting a link plus which suits my budget and will do what I want it to.Got some nizzmo 740cc injectors so heres hoping it will be in soon and tuned cos I wanna enter that burnout comp on the 1st of april but the month is going fast!! mate there is a link plus on trade me - factory clearance sale, quite a bit cheaper. Check it out. Still has warranty.I'm going to get the standard Link that up for sale there also. Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted August 3, 2005 Finally the computer is in and tuned.It went on the dyno the first time and the clutch started to slip at 5000rpm but made around 240kw at the wheels so back home and I chucked a new 6 puck clutch in it and back on the dyno but this time on a different dyno which is supposed to read less than the first one and made just over 260kw at the wheels at around 6000rpm 18psi the tuner reckons that it needs an adjustable exhaust cam wheel to get the power up.So looks like another thing to get.Wish I could come to the dyno day to see what it puts out on torque's dyno but gotta go madigras in Ohakune.Hopefully go down the winter drags and post some times. Quote Share this post Link to post Share on other sites
cainchapman 0 Report post Posted August 3, 2005 Awesome! Quote Share this post Link to post Share on other sites
E30-323ti 66 Report post Posted August 3, 2005 V.Kewl I'd be very interested to see the power/torque curve's. How does it drive?? Laggy then break your neck at 4000rpm?? Quote Share this post Link to post Share on other sites
petone 0 Report post Posted August 3, 2005 thats huge! is that on a hub dyno or rolling road? Thats some serious competition Glen. Quote Share this post Link to post Share on other sites
Guest Andrew Report post Posted August 3, 2005 Glenn is beaten - we have a new power champ! Would love to see the curves also. Quote Share this post Link to post Share on other sites
E30-323ti 66 Report post Posted August 3, 2005 Glenn is beaten - we have a new power champ! Would love to see the curves also. Forgot about.B@STARD!!!! I might have to go shopping now!!!! Don't think I can pull 42rwkw out of a bit more boost Hmmm, big single. Quote Share this post Link to post Share on other sites
13b_chick 0 Report post Posted August 5, 2005 (edited) daaaym!!! i wont sitdwn but i sure as hell wil bow dwn! daym thats phat as, front mount makeing it look staunch as i see a fulla i know has one with a rb20 in it! it goes insane! but man your cars looking good as man woop big ups!! Edited August 5, 2005 by 13b_chick Quote Share this post Link to post Share on other sites
4EVAHI 0 Report post Posted August 5, 2005 nice ride bro and tidy conversion, don't see too many beema conversions around that aren't tangs but big ups and to everyone else that gone thru the hard yars to convert the cars cause I know how much of a pain they can be hahahahaha but gd job bro Quote Share this post Link to post Share on other sites
dave 2 Report post Posted August 5, 2005 nice ride bro and tidy conversion, don't see too many beema conversions around that aren't tangs but big ups and to everyone else that gone thru the hard yars to convert the cars cause I know how much of a pain they can be hahahahaha but gd job bro post some info on ur car.. cmon Quote Share this post Link to post Share on other sites
13b_chick 0 Report post Posted August 5, 2005 post some info on ur car.. cmon you might get some info but you wont get a pic all i can say is big ups to both cars, they should have a race :bounce: :bowdown: Quote Share this post Link to post Share on other sites
bemmaboi 0 Report post Posted August 7, 2005 (edited) Big ups!! il bow down to all of u with the big conversions done.. MEan :mosh: :mosh: :bowdown: :bowdown: :bowdown: :bowdown: Edited August 11, 2005 by bemmaboi Quote Share this post Link to post Share on other sites
petone 0 Report post Posted August 8, 2005 Theres more conversions than that on the site Matt has a 12A in his E30, while 2 other have put in other bmw engines, an M50 and an M30 turbo, both in E30's as well Quote Share this post Link to post Share on other sites
Damo 23 Report post Posted August 10, 2005 Yep thats right, I have an M30 turbo in my E30. Quote Share this post Link to post Share on other sites
4EVAHI 0 Report post Posted August 10, 2005 that's right man, quite a few conversions done which are very unique, gotta appreciate ALL of them cause hard doing that on a euro Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted August 14, 2005 (edited) Well I went to the winterdrags today.Im glad there weren't any escorts down there cos I probably woulda got my arse kicked by them!! My times were prity shocking best of 14.2 and I red lighted just wheel spinning hard on the 17"s not much better than when it had the ca18det in it 2 years ago.Cambering 205 tires had about as much traction as some bmx tires.I chucked on the 15"s with some 215 but the toe in was shocking and wheels spun through third gear for 3/4 of the track.The car seemed to bog down on the line ,think i needed more revs!!.60ft and 1/8 times were crap. So dropped some pressure out the 15"s but didnt seem to make that much difference until i entered the burnout comp when they got hot and started to stick which sucked as I had to keep going back to 1st which I should have to do!!. Jeez this turning into an essay!!. But yea to sum it up.Think I need wider tires and to loose alot of camber and maybe run abit less boost.BLOODY BMA'S Shoulda left the 318I auto in it!! Edited August 14, 2005 by SRBMW Quote Share this post Link to post Share on other sites
m325i 711 Report post Posted August 21, 2005 I just saw SITDWN pulled over on the north western. Did you get done? $$$? Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted August 21, 2005 (edited) haha yea that was me ,na no tickets he was a bit bumd out that I was fully legit and kept tryna find stuff wrong but couldnt!! Guess he was gutted he couldn't make his quota I was actually really surprised cos he the first cop to pull me over in bout a year and a half!!SAFER COMMUITIES TOGETHER :thumb: :thumb: Edited August 21, 2005 by SRBMW Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted August 21, 2005 Arr crap How do you delete a post?? Quote Share this post Link to post Share on other sites
BMW POWER 2 Report post Posted August 21, 2005 Arr crap How do you delete a post?? You can't but the mods can. Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted January 18, 2006 Here you go rob The pic of the engine bay is a few pages back(please excuse the intake pipe it has now gone) It would be good if you could keep a booster in the system alot more user friendly cheers Darren Quote Share this post Link to post Share on other sites
4EVAHI 0 Report post Posted January 18, 2006 Wicked. Thanks Darren much appreciated. If you're free and don't mind at some stage wouldn't mind meeting up to show the mate the setup and get some tips with mine haha but will give you a bell soon. Thanks again bro Cheers Rob Quote Share this post Link to post Share on other sites
