Shifter mount - is it worth having

[User Name 19]

Hi Guys

See link below

http://www.realoem.com/bmw/showparts.do?mo...hg=25&fg=05

this is a part that i currently dont have no my manual conversion along with a reverse switch but instead have just bolted up the shifter to the underside of the car and seems fine.

but is it worth getting the extra bits so it looks better or if it goes just leave it as is.

also if anyone has any how much??

[bravo 34]

Which part don't you have? There are 13 different parts shown in the diagram.

[User Name 19]

I dont have any of that - i just basically Screwed the mounting arm to the car instead of having all the pretty cover etc seen i didnt have it and left it

so does having all the shifter mounting parts acutally matter - as it shifts gears fine just a gapping hole to the ground and exhaust

[Guest FrantiC]

I dont have any of that - i just basically Screwed the mounting arm to the car instead of having all the pretty cover etc seen i didnt have it and left it

so does having all the shifter mounting parts acutally matter - as it shifts gears fine just a gapping hole to the ground and exhaust

What's missing?? The rubber boot to fill the hole, Or shifter linkage??

[bravo 34]

Does yours look more like this??

[User Name 19]

Yea that looks like it - but the first link i put is actually the holder that bolts onto the back of the gearbox and sits up against the car

dont think itl be a biggy - going to get my selector rod cut tommorow so if that goes well its going to drive anyway

[320guy 0]

Nah there is two different types. The one you think you should have, and the one bravo showed you.

You probally have the one bravo showed. So you dont need the other parts.

[User Name 19]

Thanks Guys

ill just sus the reverse sensor lolz only thing i dont have