Guest Simon* Report post Posted April 15, 2010 Atta 5 stud win here http://www.trademe.co.nz/Browse/Listing.aspx?id=283005780 17x9" and in Chch Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted April 15, 2010 (edited) Atta 5 stud win here http://www.trademe.co.nz/Browse/Listing.aspx?id=283005780 17x9" and in Chch haha, Simon you are sooo last week man Went and saw the guy, he won't take less than 1500 which is a bit dear imo.. plus not a fan of the lips they don't look right.. or is it just me? Edited April 15, 2010 by crazyarab Quote Share this post Link to post Share on other sites
Guest Simon* Report post Posted April 15, 2010 I knew they were relisted but didn't know you had checked them Lips? These are 3 piece right? Lip = dish! And give the illusion of bigger diameter rims. $1500 for Gen big ones with Conti sports isn't terrible either Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted April 15, 2010 (edited) I knew they were relisted but didn't know you had checked them Lips? These are 3 piece right? Lip = dish! And give the illusion of bigger diameter rims. $1500 for Gen big ones with Conti sports isn't terrible either Absolutely but compare them to say.. They don't stagger in the way I like. Edited April 15, 2010 by crazyarab Quote Share this post Link to post Share on other sites
Guest Simon* Report post Posted April 15, 2010 Haha if you didn't want wheel issues then why'd you buy an E30??? Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted April 15, 2010 (edited) Haha if you didn't want wheel issues then why'd you buy an E30??? because it goes from 10-100k in 4.5 seconds Edited April 15, 2010 by crazyarab Quote Share this post Link to post Share on other sites
Guest Simon* Report post Posted April 15, 2010 (edited) Not on 14x6 inch weaves it wont! E: forgot smiley Edited April 15, 2010 by Simon* Quote Share this post Link to post Share on other sites
Guest Simon* Report post Posted April 15, 2010 Haha you just added half a second!!! Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted April 15, 2010 (edited) Haha you just added half a second!!! typo soz, timed it when I did not have LSD + drive shaft issues. That's all sorted so should have some very interesting acceleration now (can't wait to get it back from the mechanic) . Edited April 15, 2010 by crazyarab Quote Share this post Link to post Share on other sites
Guest Ari Gold Report post Posted April 15, 2010 (edited) I agree with Atta Edited April 15, 2010 by Ari Gold Quote Share this post Link to post Share on other sites
Guest Simon* Report post Posted April 15, 2010 Ha! Barrels are one thing, and as you well know Senor Gold, lips are interchangeable. Getting hold of multi-piece genuine 17" Schnitzers to begin with is quite another Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted April 15, 2010 (edited) Ha! Barrels are one thing, and as you well know Senor Gold, lips are interchangeable. Getting hold of multi-piece genuine 17" Schnitzers to begin with is quite another spot on simon but 1500 + 4 lips PLUS 5 stud = might aswell just buy a house ! Edited April 15, 2010 by crazyarab Quote Share this post Link to post Share on other sites
Guest Ari Gold Report post Posted April 15, 2010 Proper wheels and 5 lug (not a hack job) should set you back around 5K I'd say. Some have done it cheaper, but not many. Quote Share this post Link to post Share on other sites
APT 195 Report post Posted April 15, 2010 Can you wait 4-6 weeks for 17's? i can !! Quote Share this post Link to post Share on other sites
AN E30 Fan 1 Report post Posted April 15, 2010 http://www.trademe.co.nz/Trade-Me-Motors/C...n-284148802.htm can you afford these? Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted January 8, 2011 (edited) Time to revive this thread... Have finally got the Hartge rims down to Chch and found some spare time to mock up what they would look like. Kiril was nice enough to let me test fit them on his 5lug conversion. As you can see... HUGE is probably an understatement. The real kicker is that the front is going to also need 20-25m spacers to fit over the wilwoods... so for this bitch to work I'm going to have to follow in westy's footsteps which is highly unlikely (as expected) Also, I think these were previously fitted onto a tractor not a BMW... what the f**k kind of rubber is that! Makes it look even bigger than they already are. Got Poke? lol... With the right rubber it doesn't look quite so bad... Edited January 8, 2011 by crazyarab Quote Share this post Link to post Share on other sites
APT 195 Report post Posted January 8, 2011 Just buy my 4x100 Set Quote Share this post Link to post Share on other sites
kiwi535 538 Report post Posted January 8, 2011 you guys are mental..........in the nicest possible way of course Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted January 8, 2011 you guys are mental..........in the nicest possible way of course Hahaha, I was not going to pass up on 18" 3 piece Hartge rims regardless if they were going to fit the E30 or not A man can dream right! Quote Share this post Link to post Share on other sites
kiwi535 538 Report post Posted January 8, 2011 Hahaha, I was not going to pass up on 18" 3 piece Hartge rims regardless if they were going to fit the E30 or not A man can dream right! i cant talk....although i didnt actually do it at one time i was ready to have four sets of wheels for the 535,one of those would have involved buying another car and reselling! Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted September 16, 2011 Ok, revival of thread once again... For the pro's what would you recommend: BBS RS003 Rear: 16x9 ET0 (3" lips) or 16x8.5 ET12 (2.5" lips) Fronts will be: 16x7.5 + 23mm spacer = ET13 (1.5" lips) Need to decide today if I'm going ahead or not. Blackie what setup do you have on yours again? Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted September 16, 2011 Mine: 16x8 +7 2" Lips 16x9 +7 2.5" Lips Spacers would be needed for anything slightly larger than stock brakes on my set-up. Your specs look good? With a spacer up front like you've mentioned I'd go for it! Rare will be pretty close to flush on the guards, if you're low. DO ET. Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted September 16, 2011 Was having a chat with Jed before and seems like getting 1.5" lips on the front might be pushing it so may have to consider sticking with 1"... Here is a photo of what his 15x6.5 ET 33 rims looked like with 23mm spacers on. Using the wheel offset calculator a 16x7 ET25 rim will poke out an extra 14mm. Calculation: http://www.1010tires.com/wheeloffsetcalculator.asp Current wheel spec: Width 6.5 / Offset 10 (33 - 23mm spacer) New wheel spec: Width 7 / Offset 2 (25 - 23mm spacer) Outer position: Extend extra 14mm So if I'm to get another half inch put on with the 1.5" lip I would get something like 27mm (14mm + 1/2 inch) poke outside the guard.. thinking that would need serous guard work to pull off? So... looks like the best option is to run 1" lips front 2.5" lips back for final setup of: 16x7 (1" lips) + 23mm spacers 16x8.5 (2.5" lips) rears Got stagger?? " Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted September 17, 2011 My calculations could be bad, but by extending the lip 12.7mm the offset will drop from +2 to around -4.3 Which is 33mm more than the wheels you pictured. lol. Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted September 17, 2011 My calculations could be bad, but by extending the lip 12.7mm the offset will drop from +2 to around -4.3 Which is 33mm more than the wheels you pictured. lol. Yeh man, not ideal at all... hopefully with the 16" clearing the brakes properly I can run smaller spacers. I know with Jed's 15's it only JUST managed to fit without scraping Quote Share this post Link to post Share on other sites
