3.5 M30 short block.

[bellicose 9]

I'm looking for a 3.5 M30 short block.

Don't need head or any ancilaries, just block-crank-rods-pistons.

Must also be an early block. IE: E12/E23/early E24/early E32.

[BM WORLD 1283]

are you wanting the eraly early block with the flat pistons and 94mm bore with 84mm stroke with 10:1cr . or the little bit later one from e28 e23 e24 with 92mm bore and 86mm stroke with piano top pistons?? 10:1cr

probably can help

cheers brent

[bellicose 9]

To be honest Brent, i don't know lol. I just know it needs to be an early block to suit the mounts in the E3, later blocks don't line up.

[Silver Fox 43]

The earlier blocks have the engine mounts further back, as opposed to the E34 etc which have their mounts closer to the front of the block.

[bellicose 9]

The earlier blocks have the engine mounts further back, as opposed to the E34 etc which have their mounts closer to the front of the block.

Thanks David, i knew 'bout the E34 blocks, but any idea what was the latest they used the early blocks?

E28 E32?

[Silver Fox 43]

E28 for sure John, and if I'm right, E32 before 88, Marty or Brent should know.

[topcat 11]

E28 for sure John, and if I'm right, E32 before 88, Marty or Brent should know.

correct Dave,e23,e28 and early e32's.

have a couple of blocks about the place.

PM me for the exact bits your after.

cheers marty

[BM WORLD 1283]

correct Dave,e23,e28 and early e32's.

have a couple of blocks about the place.

PM me for the exact bits your after.

cheers marty

also e24 blocks .

most likly best option is the 1982(9 mth) to about 1987(9mth) block with the 10;1 pistons.

and you can run them on the later motronic system if you like from a e34 535i and e32 735i etc

[HELLBM 1552]

can do an`87 3.5 from a 735