Mattzy 0 Report post Posted April 12, 2010 (edited) Hey guys, reluctantly parting my project out. Have had a few offers that I cant pass up and am gutted because as I was so close to getting it all done. Oh well, will get another E30 when I'm back homeside. Off to the States and Japan on the 11th of June so needs to be gone before then, or it's going into storage. Wont be going onto TM as I dont have the time to really manage it. Everything has super low km's as the project has collected more dust than it has seen daylight. E30 bits: 4x BC gold coilovers. One rear stud is snapped. Ill replace it for new owner - $1300 SOLD 1x Genuine IS Lip. Primered. Need's paint, minor chips - $180 SOLD 1x E30 LSD 3.63 ratio. Fresh rebuild, new shims. Nice and tight with Redline oil. - $1000 SOLD 1x Racing Dynamics strutbrace - $150 - SOLD 2x Jamex bucket seats & rails - $400 SOLD Mtech sideskirts, rear bumper + fiberglass sideskirts (missing rear arch cap, should be able to use the one from the fiberglass ones no drama) $500 - SOLD 4x 16x8 Silver Alpina replicas +12 offset. Includes 2x 10mm spacers & 2x 8mm spacers and long studs. Front tires wrapped in Toyo T1R Rubber. Rear's will need new tires, although ill include the rubber currently on them. Mint condition, one minor stone chip out of 4 wheels. - $1000 - SOLD 1x M20b25 Good condition facelift radiator for sale - hoses, clamps and mint overflow bottle - $70 ono takes it all. Has connectors for cooler. 1x Facelift E30 325i 4 door rolling shell, REG on hold for 6 months, 8000k HID's, SA fuel tank, Boss kit, OBC, no engine, box etc. - $500 Not fussed if I cant move it. Will eventually sort it out when I get internet connectivity later on. Open to offers, more likely to cut deals if you buy more than one thing. Pics here: Project thread 021 172 7782 outside of work hours. (super busy trying to tie all my loose ends up) Cheers, Matt Edited May 16, 2010 by Mattzy Quote Share this post Link to post Share on other sites
bmpower 3 Report post Posted April 12, 2010 post a pic of the rad please.... is it top/bottom tanks, both hoses left and expansion hose top? if it is and you can send to wgtn i'll give you 50 plus postage. Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted April 12, 2010 post a pic of the rad please.... is it top/bottom tanks, both hoses left and expansion hose top? if it is and you can send to wgtn i'll give you 50 plus postage. Sorry mate, sold already! Gotta' be quick around here it seems! Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 6, 2010 Parts relisted. Quote Share this post Link to post Share on other sites
thirdkide30 0 Report post Posted May 9, 2010 Where is pick up? Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 10, 2010 (edited) Auckland, North Shore sorry. Cheers, Matt Edited May 10, 2010 by Mattzy Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 10, 2010 Exhaust sold, radiator anybody?! Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 11, 2010 Updated listing with E30 treasure! Quote Share this post Link to post Share on other sites
Forrest 35 Report post Posted May 11, 2010 No way dude! One of my fav cars on here, even in it's incomplete form. Best of luck getting rid of the stuff, and have fun overseas Quote Share this post Link to post Share on other sites
BenEvans 0 Report post Posted May 11, 2010 hey mate, im also on the shore, is it possible to come view the parts, could be interested in a few. cheers 0211025021 Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 11, 2010 (edited) No way dude! One of my fav cars on here, even in it's incomplete form. Best of luck getting rid of the stuff, and have fun overseas Cheers man, yeah its a bit of a bugger how its panned out but Im dead set on doing some more traveling and I'm too young and good looking to get tied down. Haha..Hopefully someone wants the whole deal. S50 Swap, paint white and steal peoples girlfriends. Thanks mate. Matt /Edit - I'll be back. Edited May 11, 2010 by Mattzy Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 11, 2010 hey mate, im also on the shore, is it possible to come view the parts, could be interested in a few. cheers 0211025021 Hi Ben, just text you. Cheers, Matt Quote Share this post Link to post Share on other sites
sik bm 0 Report post Posted May 11, 2010 Hey mate have you still got the Mtec2 kit? And IS lip ? Cheers Quote Share this post Link to post Share on other sites
3 SERIES 93 Report post Posted May 11, 2010 Hey mate have you still got the Mtec2 kit? And IS lip ? Cheers Go back and read the OP! Quote Share this post Link to post Share on other sites
thorburn 121 Report post Posted May 11, 2010 do you have any pictures and details of the seats? sad to hear it isn't going to get finished Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 11, 2010 do you have any pictures and details of the seats? sad to hear it isn't going to get finished PM'd cheers Quote Share this post Link to post Share on other sites
oscar90 0 Report post Posted May 12, 2010 sh*t i wanted those wheels!, what was that diff ratio like in a stock 325i? whats it revving @ 100km/h? Andrew Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 12, 2010 sh*t i wanted those wheels!, what was that diff ratio like in a stock 325i? whats it revving @ 100km/h? Andrew haha sorry buddy, snapped up quickly. I liked the ratio, couldnt tell you what the RPM was at 100km though. Although im sure one of the guru's on here know to work out what the RPM would be? PM if your keen on it and we can work something out. Cheers, Matt Quote Share this post Link to post Share on other sites
JiB 2 Report post Posted May 12, 2010 Rolling shell have struts/springs in it? How much work has been done for Rb motor? Or is a M20B25 gonna be able to be bolted back in? Got driveshaft/diff? Chur Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 12, 2010 Rolling shell have struts/springs in it? How much work has been done for Rb motor? Or is a M20B25 gonna be able to be bolted back in? Got driveshaft/diff? Chur PM'd have back half of driveshaft and LSD diff as mentioned above. Quote Share this post Link to post Share on other sites
Top Secret 2 Report post Posted May 12, 2010 (edited) Nooooooo. This was probably my favourite project on Bimmersport. At least while you're young you can go exploring worldwide without having money tied up in a car. edit: My 3.64 was revving at ~2200rpm at 100kmh. I like the ratio Edited May 12, 2010 by Top Secret Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 12, 2010 Nooooooo. This was probably my favourite project on Bimmersport. At least while you're young you can go exploring worldwide without having money tied up in a car. edit: My 3.64 was revving at ~2200rpm at 100kmh. I like the ratio Cheers dude, never fear, I'll be back for sure Ta for the info. Matt Quote Share this post Link to post Share on other sites
Mattzy 0 Report post Posted May 14, 2010 Open to offers on the shell. Need it gone thanks has OBC and SA long range tank Cheers, Matt Quote Share this post Link to post Share on other sites
