E30 Front Lip + Few Other bits

[98_s14 0]

Hi all,

I'm after a front lip for a facelift E30, the 318iS lip would be lovely, but I doubt anyway has one they'd part with....normal lip would do fine.

Also after:

- the pre-radiator shroud from a South African E30....ie the bit of plastic before the radiator. (it just needs to allow for the deeper radiator).

- brake proportioning valve from a disc rear E30

Any or all of these would be much appreciated, please PM or reply.

Thanks a lot

[Top Secret 2]

What is the brake proportioning valve? If you tell me/take a pic I can have a look at the parts E30 tomorrow and tell ya.

edit: Oh, and the shroud thing. Not entirely sure what bit that is?

Edited July 19, 2010 by Top Secret

[98_s14 0]

I've found a front lip I think, just waiting to hear back from APT.

Part number 2 below is the bit I mean, the plastic bit that ducts air into the radiator.

The brake proportioning valve is part number 5 below, has to be from a car with rear disc brakes.

Thanks for your reply Top Secret, are those pictures big enough to see?

[_ethrty-Andy_ 2132]

just to check, that piece you have shown is not compatable with aircon... do you have aircon in your car?

[98_s14 0]

just to check, that piece you have shown is not compatable with aircon... do you have aircon in your car?

Appreciate the heads up thanks Andy, I don't have AC in the race car but it would be nice

I was more trying to demonstrate roughly which bit of plastic I meant. I bought a SA radiator because it was a bit deeper than the one I had, but the plastic duct I have now blocks the lower 1/3rd or so.

[98_s14 0]

Bump

[APT 194]

Get my PM Re. Front lip ?

[98_s14 0]

Get my PM Re. Front lip ?

Yeah I did, I will try to pick it up tomorrow after work. I'll text you tomorrow to see what suits,

Thanks again

[APT 194]

Sweet az mate.

[98_s14 0]

Bump. Lip found, thanks Andrew.

Still after proportioning valve from disc rear E30...and radiator shroud from South African E30.

Cheers