Engine Mounts for M3 95

[swordfish 30]

Hey guys wanted to know your oppinion on engine mounts.

Which are best for street and a bit of track use? Uratheine or rubber?

I've heard UCC track ones are good.

It is for M3 95 Euro

Cheers.

Edited July 29, 2010 by swordfish

[*Glenn* 854]

Whats wrong with standard mounts ? or have you modified the motor ?

[swordfish 30]

Whats wrong with standard mounts ? or have you modified the motor ?

Hey, Glenn.

No I haven't modify it. But standard mounts got saggy and now I need to change them... So wanted to know what are my options. I have read on allot of websites that standard mounts have poor design, plus I though urethane would be good and they are not too expensive...

http://store.nexternal.com/shared/StoreFro...et=products.asp

when standard are

http://www.turnermotorsport.com/html/detai..._ID=11812283798

Please let me know if you know something that could help me.

Edited July 29, 2010 by swordfish

[*Glenn* 854]

They will after 15 years.. like mine did... I just replaced them with new genuine ones and have no problems

[nastnas 9]

theres alot of stuff on the net which says that the factory stuff used a poor design, and there probably are items which did have poor design, but the engine mounts lasted 16 years and now need replacing.... thats not poor design

[[email protected] 0]

I would just go get some stock ones from Gavin at Euro Italian. No need to over complicate a simple part that wears out!

By going for harder types you're just going to make the car vibrate more.

Edited July 30, 2010 by Mike-E36