Jump to content
Sign in to follow this  
havak2tone

my bbe wont start

Recommended Posts

Hi guys ,

I have a bit of a problem.my car wont start unless pushed.Its been parked for a while and i got it off my grandad for free ,its a e30 4 door.It started the first few times but no it wont start unless push started.I got the car of me grandad after about six months in storage.I dont even hear the car trying to start.I just gotta keep alternating the gas and the clutch while car is moving to jump start it .And it always dies out when the revs go below 1500 its always dies.Please some diy advice is needed.Selling it off is not an option,This car has sentimental value for me.Its never gonna get sold,

Please help .I reckon the starter motors f(*&^%).But im not sure.

Share this post


Link to post
Share on other sites

the dying below 1500 RPM is odd, and could be unrelated, check for any rips / tears in the air intake piping

Does sound like the starter motor has gone,

The obligatory, what year / engine do you have?

Share this post


Link to post
Share on other sites

the dying below 1500 RPM is odd, and could be unrelated, check for any rips / tears in the air intake piping

Does sound like the starter motor has gone,

The obligatory, what year / engine do you have?

this car is a 1984 e30 4 door .The funny thing though is that i have to tuen the key AND press a buttone next to the handbrake to get it started.Even then it wont start?Im lost,I dont know what to do what do you reckon i should look for?

Share this post


Link to post
Share on other sites

What actual model s it? e30 is just a shape....

Share this post


Link to post
Share on other sites

oh yup it is.320i ...completely standard engine and stuff.

i really hope its not a big problem.The car started the first few times.But after i parked up it wont start unless push started .It always dies out when i come to a stop so i have to keep revving it to keep it alive.

Share this post


Link to post
Share on other sites

My money is on the battery being totally shagged, like totally toasted, betya its well below 12V. And the alternator cant keep up with running the engines electrics and try to charge a dead flat battery below 1500rpm, so the ignition etc/ cuts outs.

Pinch a battery out of another car and see if it solves it.

Edited by Jacko

Share this post


Link to post
Share on other sites

My money is on the battery being totally shagged, like totally toasted, betya its well below 12V. And the alternator cant keep up with running the engines electrics and try to charge a dead flat battery below 1500rpm, so the ignition etc/ cuts outs.

Pinch a battery out of another car and see if it solves it.

This. My E34 did same.

Share this post


Link to post
Share on other sites

i tried a battery out of my uncles car and it starts fine now.Shot for the advice cuzzies.One Thing though,After i put the old battery back it worked fine???

A bit strange to be honest???

I also have a lose exhaust gasket .What tools will i need for it?? Does anyone know where i can get tool boxes for bmw cheap.

Share this post


Link to post
Share on other sites

A socket set. I prefer 1/2" drive. because 3/4" drive's are kind of a bit weak.

You only really need specialised sockets. like e-torx, sometimes.

Share this post


Link to post
Share on other sites

Okay cool ill get it.

One quick question ,Im new to this project car thing and to be honest .This e30 will be my first ever one, heaps of people tell me that theyre sh*t expensive.I learn quick,How do you guys know so much about your cars and like diagnose stuff and how to replace and clean up everything? Are there any books lol??

Ill be posting pics of my new purchase.1984 320i 4 door e30 ,It looks pretty hoarty but runs(apart from the battery)

What should i do first ??

Im guessing rust and dents?

then interior?

I want to bring the dead looking thing back to life ,But i dont want attention from cops so no tinting and stuff like that but might lower it and fit some sexy deep dishes.

Would really like a few pointers and help with my car

If any off you guys live near hillsborough auckland.Hit me up ,Im really keen to watch and learn,especially the use of tools?

Edited by havak

Share this post


Link to post
Share on other sites

Oooh yes, Haynes/Bentley are the best things you can get as an E30 Owner, there are PDF's around... but they're worth their weight in gold and I reccomend spending the 70 odd dollars...

I'd definately get on that rust ASAP.

Share this post


Link to post
Share on other sites

I have a copy of the haynes manual you can have. I just got the bentley manual which is much more detailed, so doubt Ill look at the haynes again.

Im in Onehunga, throw me a PM for addy and you can pick it up.

Edited by Jacko

Share this post


Link to post
Share on other sites

This is a very handy site as well http://www.bimmerdiy.com/dir/e30

Also, just googling and reading up on things esp main issues with e30's etc will help you realise when things do go wrong!

Edited by cliffdunedin

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...