Jacko 2153 Report post Posted October 31, 2010 (edited) A few bits up for grabs, open to offers on the lot, I have no where too store them. Engine can be seen/heard running for the next 3 weeks in the car, all the bits will be available to pick up end of November early December in Mt Eden. - M20B23 L-Jet 145xxx miles. Runs and sounds sweet, no valve train noise, starts first pop everytime. Was blowing smoke on engine braking and then accelerating, but a recent oil change seems to have fixed that. Wise man would change the thermostat, waterpump, cambelt before installing, as I have no record of when they were last done. It does not come with a flywheel or starter motor, but is otherwise complete with alternator/loom/mounts/dme etc. Engine possibly has an more agro cam than stock, but I cant confirm it as have never driven another B23, going from the words on the internets the UK M323's had higher lift/duration cams fitted, and the engine feels quite peaky too drive, compared to a normal 323 which aparently has a flatish power curve. It kept up with a mates GSR libero, and smoked a GT starlet for what its worth Cheapest bang for buck upgrade for a 318/320 around. $300 * Metal airbox, could use a paint - $30 * 3:23 Medium cased diff, whines a bit, lock it up and do skids, or rebuild with an LSD centre? - $50 * 323 Halfshafts (pair) - $50 * Stock e30 gearstick - $5 * 4 Spoke E30 steering wheel, good nick - $20 * 323 Radiator+expansion tank, average condition radiator but doesnt leak, tank is tidy - $30 * 323 exhaust twin pipe exaust, complete from manifold to rear muffler, no leaks (i know of at least!) - $40 * Front and rear sway bars, 20mm and 13.5mm, including NEW polyurethane bushes $150 * New Rear sway bar links (ordered in error) pair - $50 SOLD * Brake booster, could do with a lick of paint if your that way inclined. Take the lot for half a gorilla. Edited January 25, 2011 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 3, 2010 Bump. Im very open to offers. Proceeds will fund the beer/fluids for the M50 swap, and I get enough greif for filling up mates workshop with old BMW bits Can possibly work out delivery of the engine in the Akl region. Quote Share this post Link to post Share on other sites
antil33t 90 Report post Posted November 3, 2010 Would you be keen to send the bars/bushes to Dunedin? Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 3, 2010 Would you be keen to send the bars/bushes to Dunedin? Could be done, Ive sent model planes bigger and heavier using fastway couriers before, they werent too steep price wise, be less than $50 at a guess. Quote Share this post Link to post Share on other sites
antil33t 90 Report post Posted November 3, 2010 Sweet, let me know you've got ages anyway. Mostly want the bushings haha. Quote Share this post Link to post Share on other sites
oscar90 0 Report post Posted November 5, 2010 would own those halfshafts if they were in CHCH.. Linden would have probably beaten me to it actually haha Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 6, 2010 (edited) Rear sway links pic, adjustable whitelines came with rear links which i didnt expect, so these got ordered by mistake. p/n 33551126932 Fits E30 E36 E28 E24 E23 Z1 $50 incls shipping (in NZ ) SOLD Edited November 12, 2010 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 6, 2010 (edited) Also got a new rack end for an E30. Same as these - http://www.adl.co.nz/Catalogue/BMW/3+SERIE..._SUSPENSI_5434/ Box has been opened and got greasey paw prints on it, buts its new. $30 Edited November 6, 2010 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 7, 2010 Would consider swapping some bits for some 51mm front struts Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 9, 2010 Bump, And Ive found some other bits that I dont need. M50/52 thermostat housing gasket - New (obviously) - $10 New O rings etc for M50/52 oil filter (Big one, little one, and washer) - $5 E34 M50B25 engine mount arms - Free. Will swap the above for an M50B25 Crank pulley bolt, cos F'd if I know where Ive put mine... Quote Share this post Link to post Share on other sites
_BRS_ 209 Report post Posted November 9, 2010 Rear sway links pic, adjustable whitelines came with rear links which i didnt expect, so these got ordered by mistake. p/n 33551126932 Fits E30 E36 E28 E24 E23 Z1 $50 incls shipping (in NZ ) Il take these thanks! Pm me bank acc details Cheers Blair Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 9, 2010 Il take these thanks! Pm me bank acc details Cheers Blair Done burger. Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 11, 2010 Got a gasket for the casting around the camgears on a M50 (NV) too if anyone wants one p/n 11-36-1-740-840 - $10. Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 12, 2010 Bump. Can possibly install the M20 in your E30 for a good rate, but itll depend on what bits you have already. If your interested we can discuss. Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 20, 2010 Bump Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 23, 2010 (edited) Bump My lovely lady Bumps Everything is available to pick up next week, and I am extremely open to offers, filling up mates workshop with more old bmw parts is gonna cost me beers and grief. Have a pair of E24/28 engine mounts, 2nd hand but good nick. There not M5/6 jobs (both are cylindrical) but fit with sweet with an M50 swap and save ya $150US over new M5 ones. $10 Also have a spare E30 battery in boot cable $30. Edited November 23, 2010 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 29, 2010 (edited) Bummmmmmmmmmmmmmp Also have new genuine crankshaft bolt and spacer 11211720633 & 11231288660 for virtually all M5x engines from E36's too E85's - $30 Beers are an acceptable currency. Edited November 29, 2010 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted November 30, 2010 Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted December 2, 2010 (edited) All this stuff is currently available. I also have a supersport cup kit, lowering springs and sports shocks to fit a 51mm e30. Low ks, theyre about a year old. TUV certed, made in germany. Bargain at $400. Edited December 2, 2010 by Jacko Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted December 3, 2010 http://www.venommotorsport.com/supersport-suspension.php For $500 ill do supersport springs and shocks, Mtech swaybars with new polyurethane bushes. Can organise fitting for good rate too. Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted December 4, 2010 Bumpppppppppppppppppp. Surely someone wants uber cheap lowering springs + sports shocks and swaybars etc Theyre around a 50mm drop, nice spring rates, not rock solid and are nice for everyday driving. Shock are around 30% harder than stock. Make your E30 go around corners Quote Share this post Link to post Share on other sites
Phatputer 3 Report post Posted December 4, 2010 There is a whole lot of this stuff I want, had I not just spent 3k on the cars I would be in, I need to have a nosy at the 325 shocks first, see what it has in it, Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted December 5, 2010 Tardme'd http://www.trademe.co.nz/Browse/Listing.aspx?id=338018143 http://www.trademe.co.nz/Browse/Listing.aspx?id=338020493 http://www.trademe.co.nz/Browse/Listing.aspx?id=338019306 http://www.trademe.co.nz/Browse/Listing.aspx?id=338023351 Quote Share this post Link to post Share on other sites
Jacko 2153 Report post Posted December 5, 2010 Screw it, they need to go lol $1 reserve Quote Share this post Link to post Share on other sites
Phatputer 3 Report post Posted December 5, 2010 Would you consider shipping? I note the buyer must pick up, kinda leaves me unable to bid Quote Share this post Link to post Share on other sites
