tire 10 Report post Posted January 17, 2011 (edited) Topic changed. I have sourced a G260 gearbox from an M30 powered E28. I need the front half of the driveshaft because of the larger flange on the output shaft of the gearbox. Please get in touch if you have a spare I don't want to just swap the flanges from an E30 G260. Thanks Max. Edited January 25, 2011 by tastic Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted January 17, 2011 can do a starter motor and clutch kit for a dual mass flywheel . and here is what you need for a flywheel http://www.jbracing.com/flywheel-bmw2.php Quote Share this post Link to post Share on other sites
Creaver 55 Report post Posted January 17, 2011 I recommend a JB racing FW - although it is expensive as you can see Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted January 17, 2011 People trying to help Max with this need to be aware that this is Bens old car and has the M10 gearbox behind the M30 which could be why this is giving problems for them. Quote Share this post Link to post Share on other sites
Jono51 59 Report post Posted January 18, 2011 (edited) hey max, didn't realise it was you on the phone, and I was hectic at the time will call you back tomorrow with some ideas wait till i"ve called you Edited January 18, 2011 by Jono51 Quote Share this post Link to post Share on other sites
tire 10 Report post Posted January 18, 2011 (edited) Cheers Jono! Good to hear business is going well. Edited January 18, 2011 by tastic Quote Share this post Link to post Share on other sites
tire 10 Report post Posted January 21, 2011 (edited) Flywheel hopefully sorted (just need to get it checked out by Bob), starter motor hopefully on the way, so I just need a clutch and PP. Does anyone know if an M20 clutch & PP will work on an M30 flywheel? I was thinking about something like this http://www.trademe.co.nz/Trade-Me-Motors/C...n-348665447.htm Edited January 21, 2011 by tastic Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted January 22, 2011 Flywheel hopefully sorted (just need to get it checked out by Bob), starter motor hopefully on the way, so I just need a clutch and PP. Does anyone know if an M20 clutch & PP will work on an M30 flywheel? I was thinking about something like this http://www.trademe.co.nz/Trade-Me-Motors/C...n-348665447.htm m20 clutch wont work on m30 flywheel . m30 have a bigger clutch disc etc . auto clutch in morning side have them and he can do beefier pressure plates etc fro a bit more Quote Share this post Link to post Share on other sites
tire 10 Report post Posted January 22, 2011 Ok thanks Brent. Doesn't look like Auto Clutch are open today. Quote Share this post Link to post Share on other sites
tire 10 Report post Posted January 23, 2011 Back on the hunt for a flywheel as it turns out the one I had was an M40 one. Quote Share this post Link to post Share on other sites
tire 10 Report post Posted January 25, 2011 (edited) Bump. OP changed. Thread recycling - save the planet. Edited January 25, 2011 by tastic Quote Share this post Link to post Share on other sites
