Fall3n- 0 Report post Posted January 24, 2011 (edited) Hey guys selling my wheels as they just don't suit my car and I want something a little bigger. http://www.trademe.co.nz/Trade-Me-Motors/C...-349679664.html 4 X Original BBS RS 040's with near new tyres! '8JX16H2ET24' 16" x 8", 24 offset 4x114.3 PCD 3 of the 4 wheels are in good condition, all 3 have centre caps and are tidy. The 1 remaining wheel has a bit of curb damage and is missing the centre cap, not buckled as far as I can tell, lip has a little bump in it though. All 4 wheels come with near new tyres 225/50R16s Kingstar Directionals. Would make an excellent set of wheels with a tiny bit of TLC Will fit a lot of japs, maybe a few euros, anything with 4x114.3 PCD Looking for around $750+, testing the market. Any questions just ask! Edited January 24, 2011 by Fall3n- Quote Share this post Link to post Share on other sites
APT 195 Report post Posted January 24, 2011 Flat back or scalloped ? Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted January 24, 2011 Flat back or scalloped ? Not sure, was meant to check today when the wheels were off, can I tell with wheels on? Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted January 27, 2011 Have taken a wheel off, they are flat back, here is a picture. Uploaded with ImageShack.us Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted January 27, 2011 Bump, open to offers Quote Share this post Link to post Share on other sites
Jeddy 0 Report post Posted January 27, 2011 (edited) Edit: Does flat back mean they can be re-drilled? Does someone know what the centre bore is on an RS040? Also, I see your in Hamilton. Edited January 28, 2011 by Jeddy Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted January 28, 2011 Edit: Does flat back mean they can be re-drilled? Does someone know what the centre bore is on an RS040? Also, I see your in Hamilton. I imagine they can be re-drilled yes, and yes, I am in Hamilton. Quote Share this post Link to post Share on other sites
AN E30 Fan 1 Report post Posted January 28, 2011 Want very badly. Flat backs can be re-drilled. However, I think the center bore on these is 66.1mm and E30s are 57.1mm Plus there are way too many E30s rocking BBS RS nowdays Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted January 28, 2011 Want very badly. Flat backs can be re-drilled. However, I think the center bore on these is 66.1mm and E30s are 57.1mm Plus there are way too many E30s rocking BBS RS nowdays At least its not smaller, you can get locating rings. Just do it. Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted January 28, 2011 (edited) Want very badly. Flat backs can be re-drilled. However, I think the center bore on these is 66.1mm and E30s are 57.1mm Plus there are way too many E30s rocking BBS RS nowdays But they look so damn good Edited January 28, 2011 by Fall3n- Quote Share this post Link to post Share on other sites
hybrid 1044 Report post Posted January 28, 2011 Easy enough to press a ring into the wheels to fix up the center bore Quote Share this post Link to post Share on other sites
grantdavis28 8 Report post Posted January 28, 2011 can anyone comment on price of re drilling. im quite keen on these. Quote Share this post Link to post Share on other sites
APT 195 Report post Posted January 28, 2011 It depends if they are able to drill through the gaps between the 4x114, or if they have to fill and drill which is alot more expensive $$$$ Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted January 31, 2011 Will sell without tyres for the right price Quote Share this post Link to post Share on other sites
Fall3n- 0 Report post Posted February 2, 2011 SOLD Quote Share this post Link to post Share on other sites