Filth 5 Report post Posted May 28, 2013 Hey guys, So I tried getting into the headlights on the weekend and this proved to be impossible... managed to remove them from the car, applied the heat gun and being cautious tried to remove the plastic headlight cover and no luck. Is there anyone on here that can help me install the parts I have for this as I NEED to get a WOF asap for the car. Will happily pay $$ I am in the Auckland / Parnell region. Quote Share this post Link to post Share on other sites
allan 295 Report post Posted May 29, 2013 http://www.bimmerboard.com/forums/posts/494750 This is for the pre face lift if yours are face lift then I used an oven set at 60 c for 5 minutes to soften the sealing compound strip the headlight of ever thing first. Quote Share this post Link to post Share on other sites
Filth 5 Report post Posted May 30, 2013 No one else can help on this front? I got pulled over last night and got let off but still... there must be someone here that has done this or can help... Quote Share this post Link to post Share on other sites
allan 295 Report post Posted May 30, 2013 Yes I have on a 2001 facelift 530i and a 540. Quote Share this post Link to post Share on other sites