Jump to content
Sign in to follow this  
cliffdunedin

E39 headlight bulb removal/replacement?

Recommended Posts

Bit of a noob Q and i've had a search but i can't seem to figure out, if i need to replace the whole bulb housing or if an aftermarket H7 will plug straight into the connector,

Posted Image

Please help, feeling very special :ph34r:

Share this post


Link to post
Share on other sites

plug n play mate

Share this post


Link to post
Share on other sites

Cheers, any idea if repco or supercheap stock them or do i need to swing by the dealers?

Share this post


Link to post
Share on other sites

they are standard so if you ask for / find an H7 that's what you get.

There are better manufacturers tho, I think repco does phillips? they are good.

I also picked up some from supercheap.

Share this post


Link to post
Share on other sites

The bulb shown is not H7. It looks likely to be a 9006 (also known as HB4), I assume this came out of your fog light?

Share this post


Link to post
Share on other sites

Could be a 9005 from highbeam - used in PFL e39 I think?

Either way unscrew housing from headlight, take into any auto shop and replace. Easy.

Share this post


Link to post
Share on other sites

The bulb shown is not H7. It looks likely to be a 9006 (also known as HB4), I assume this came out of your fog light?

Yep - either HB3 or HB4. Most definitely not an H7. The housing in the pic is part of that particular bulb type & can't be separated/removed.

When replacing the bulb make sure you put it in the right way (filament position is critical) & don't touch the glass....

Share this post


Link to post
Share on other sites

Pre F/L E39 lamps use HB3 & 4 bulbs in low & high beam. Fogs, from memory are H7

Share this post


Link to post
Share on other sites

That one there is an HB3, can tell usually by the fact it doesn't have the weird ceramic part on the tip of the bulb. The connector there is attached to the bulb and can't be removed from the bulb, and yes Supercheap definitely stock them.

Share this post


Link to post
Share on other sites

Thanks for the help team, was a HB3.

I thought the bulb part could actually be removed from the plastic as i've never seen a bulb like this before :unsure::lol:

Share this post


Link to post
Share on other sites

so much easier to install with the quick turn.

hb3 and hb4 have slightly different tabs so cant interchange.

also one has a single notch inside the plug the other has 2.

similar bulbs just slightly different light diffusion for different reflector types.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...