E36 M50 2.5 Block or cooked engine - sorted thanks

[richard.pykett 36]

Bare M50 2.5 block or bare M50 2.5 cooked engine. Prefer Auckland please. Needs to be E36 with rear sump. Thanks - Richard 09 268 4140.

Edited December 16, 2013 by Skintkarter

[BM WORLD 1283]

have a cooked 96 323i m52 coming out of the car soon

[richard.pykett 36]

Thanks Brent, but needs to be M50. Long story, but I have a good E34 M50B25 (nv) as the future race engine, but wanted to convert the sump to the rear. Got given an E36 sump, pickup and windage tray, swapped the E34 sump for some missing suspension bits, but then found that I had no mountings for the E36 windage tray in the E34 block. Hence now trying to source an E36 block or cooked engine that I can use for a mockup and then swap the blocks later on.

I will talk to you about that 2.8 crank you have later on, as I'm still leaning towards a forged crank for the likely HP.

[thorburn 121]

I've got an m50 block from an e36. If Hamilton isn't too far away