LemonHunter 583 Report post Posted March 28, 2016 Everything seems to be working alright after the engine swap, the only remaining legacy of the Motronic to Jetronic Downgrade is the econometer not working. Just slams hard to the right as soon as I start, anything i can do to get it working? Quote Share this post Link to post Share on other sites
eliongater 718 Report post Posted April 18, 2016 It's probably accurate I don't think you can make it work with kjet. https://groups.google.com/forum/m/#!msg/alt.autos.bmw/KI_nSPw2kS0/TLfROguIg58J 1 Quote Share this post Link to post Share on other sites
LemonHunter 583 Report post Posted April 18, 2016 I did get it working for a few hours, then it and the tacho signal started freaking out together. Sent from my SM-G900F using Tapatalk Quote Share this post Link to post Share on other sites
LemonHunter 583 Report post Posted April 20, 2016 Okay have fixed it, and a few other oddities (like the unloader relays not being connected anymore). Now have the E21 M20B23 running happy as larry. Tacho and Econo needles went all haywire due to me putting the long screws in the lower inboard position on the dash surround... i.e. the screws ate through a few tracks on the SI board... doh... all repaired now, and dead lamps and LED's replaced while i'm at it, and some dry joins reflowed. 2 Quote Share this post Link to post Share on other sites
