Will these wheels fit ? E60 facelift 550i

[550i 1]

19x9F+19 245-30-20 FALKEN and 19x10.5R+25 285-25-20 I've been looking around online and cannot get a good answer to this question I want to try and get is larger offset and width wheels as possible without rolling the Factory guards.  Looking to get some custom made Wheels so I need to get the specs right any help would be appreciated thanks.

[BM WORLD 1283]

should be ok ,but go here and put specs in .

http://www.willtheyfit.com/

https://www.wheel-size.com/calc/

http://www.1010tires.com/Tools/Wheel-Offset-Calculator

Edited February 2, 2017 by BM WORLD

[550i 1]

Hi thanks for the reply I don't see where that takes into account the difference between the fender  clearance and brakes etc that's just a generic tool is definitely not what I'm looking for.  

[WYZEUP 283]

It will give you an idea of how much further they will stick out from the wheels that are currently fitted to your vehicle so you can then get a measuring tape and go outside and have a look for yourself.

 

Question? why are you fitting 20" tyres to 19" wheels?

Edited February 2, 2017 by WYZEUP

[550i 1]

No that's a typo that was just part of where I stole the specs from he had  20 inch mags I didn't adjust the tires.  Ok thanks for that and yeah I'm still looking for somebody who's got experience I know they can hit the brakes and all sorts of things being custom made Wheels I have to get it exactly right cheers

[WYZEUP 283]

http://5series.net/forums/tires-wheels-52/how-did-i-fit-19x9-5-et20-front-19x10-5-et22-rear-255-35-285-30-tires-pics-142605/

 

 

[550i 1]

Thank you sir 

[550i 1]

After reading the article now that I'm at home it seems like the specs that I have above are probably about right maybe I need it plus 15 OFFSET on the front as it seems that a lot of them are using a 5 mil spacer.