Jump to content
Sign in to follow this  
e46v12

Project twin e34's + X5 4.6is manual swap

Recommended Posts

Great work.

Just curious, what type of custom clutch and flywheel set up did you go with for both? And where did you source them?

 Reason for asking is i recently did a clutch in an e31 that is factory manual/m60’ Went from a DMF to a single flywheel setup and not quite happy with the amount of shudder it now has. 

cheers

Share this post


Link to post
Share on other sites

@treone I got a guy name Greg at  MP Auto in Upper Hutt. We used a M62 auto ring gear, then a custom machined steel flywheel which he custom dowel to allow a nissan pressure and clutch to be able to be mated. The centre of the clutch disc had been swapped out for a bmw one. But Unfortunately the only way to get rid of your shudder would be to go back to duel mass again. You could minimise the amount by putting some thicker gearbox oil in. Get your clutch disc and pressure plate to have some sort of damping springs in them. But after all that you may still have shudder. Hope thats helps you or go in and talk to Greg, hes a real nice guy and really helpfull.

Share this post


Link to post
Share on other sites

Thanks @e46v12!

appreciate the tip - will look into changing to a thicker oil

Will live with the shudder for now, but plan to revert back to DMF at some point.

Interestingly, the original clutch went to MP Auto and i had several conversations with Greg as I’m localish. They diagnosed buggered flywheel, but couldn’t source a direct replacement. 
i had to go with a single due to not easily finding one (locally or overseas) and bmw wanting $5k for a full setup - ouch! Plus i had to get it mobile and off my mechanics lift. 

Always look forward to your updates - admire your knowledge and skills - awesome stuff! 😁

Share this post


Link to post
Share on other sites

@treone you could get a later model setup from a e39 m5. I normally order from FCP euro in the States. This will bolt up to your motor and box.

m60 and m62 share same flywheel bolt pattern and use the same gearbox too.

https://www.fcpeuro.com/products/bmw-clutch-flywheel-m5-21212229190#fitment

https://www.fcpeuro.com/products/bmw-clutch-kit-m5-z8-e39-e52-k70282-01

 

Edited by e46v12

Share this post


Link to post
Share on other sites

Thanks again @e46v12

I wasn't 100% sure about compatibility between m60 and m62, Google can be confusing most times 😀. As kindly confirmed by yourself, I will use this set-up for my other e31 then get a second set later on to revert my other one back to DMF. A costly exercise but two sets for less than one genuine kit is a bargain - that's fun of having twin classic BMW's haha.

Appreciated once again, cheers!

 

  • Like 1

Share this post


Link to post
Share on other sites
On 1/5/2022 at 12:26 PM, treone said:

Great work.

Just curious, what type of custom clutch and flywheel set up did you go with for both? And where did you source them?

 Reason for asking is i recently did a clutch in an e31 that is factory manual/m60’ Went from a DMF to a single flywheel setup and not quite happy with the amount of shudder it now has. 

cheers

Sorry to hi-jack but if you do decide to ditch the setup i'd possibly be interested in taking it off your hands. For a 6 speed box?

Share this post


Link to post
Share on other sites
2 hours ago, WYZEUP said:

Sorry to hi-jack but if you do decide to ditch the setup i'd possibly be interested in taking it off your hands. For a 6 speed box?

Correct - mated to 6-speed box.

Never thought of this but could be a possibilty. It probably won't be for a little while though, as I have other priorities at the moment and as I accumulate the replacement parts.

Probably best to PM for details etc.

Cheers

Share this post


Link to post
Share on other sites

Hi team 

Long time no post, Just been a bit slack on the updates but still trucking along with the projects. 

so the wagon is fully driving now, had a few hick ups but 3rd time lucky with the exhaust, getting the right  tyre size and 5th gear detent to shift properly but all sorted now.

Also finished making a little catch can and swapped out the steering wheel for a smaller e36 one. 

P1040082.JPG.2e7de2d8ff337d859e3c6c7188eda253.JPG

P1040083.JPG.fadfe16b8175a1ac35773780d3bb351d.JPG

P1040084.JPG.2ca0f5bc3f13a23e61a5e65acc0d8b40.JPG

Now its fully tucked up and doesnt scrap the ground

P1040088.JPG.e2a133eef8a06bff7df393b84e3d827b.JPG

custom hamann 3 piece wheels 18x.8.5 fronts and 18x9.5 rears

P1040091.JPG.7f7f50f49206e83b340a5dce0615f631.JPG

P1040092.JPG.b2d561efec4b3e5fcea65ca1649ee9f7.JPG

Thanks team

Edited by e46v12
  • Like 1

Share this post


Link to post
Share on other sites

Wow.  Glad I stumbled on this thread.  Great work.  Where can I buy the headers?

 

Share this post


Link to post
Share on other sites
On 10/9/2022 at 1:33 AM, Lincoln said:

Wow.  Glad I stumbled on this thread.  Great work.  Where can I buy the headers?

 

Hi Lincoln give Austin a message on F.B look up Stirling Street Machines  he made my ones :) 

Share this post


Link to post
Share on other sites

Hey Team

Happy New Years

Its been a while since the last post, busy with other projects. But happy to say I managed to take the car on a nice road trip to Auckland for a small E34 meet. I wanted to give the old girl one last drive before i put her on the market. Not much left to do other than fit the Mtech bumpers i have repaired and painted, Redo the hood lining, Go for cert get WOf and rego then its good to go.

P1040111.JPG.141094187c35f3e561b326e5a8b884f9.JPG

P1040112.JPG.28f2a5f68b06c7bef72bb5ae9a24b2e1.JPG

P1040114.JPG.f48b638278b8b7da92fce8648caa318a.JPG

P1040118.JPG.2074bb93e00cd1c534d0c047ba590b8f.JPG

P1040119.JPG.adc90213d85e403f8fe6cb27517c0ba0.JPG

P1040120.JPG.b3bda49979f125a483e3c3ed9680dc41.JPG

Also big plans for the X5 4.6is manual, Ive decided to use the v12 manual that was for another project, I will be swapping it in the X5 and twin turbo it. 

Once the wagon is finished i can crack onto the new swap.

Thanks Team

 

  • Like 1

Share this post


Link to post
Share on other sites

Hey Team

Can you believe we are already in April, so some of you may have seen it on trade me. The time has come to move the e34 wagon on, Its been such a pleasure to build but am looking forward to the X5 v12 twin turbo build. Just the interior left to put in and cert next week to go.

So here are some pictures of the wagon currently just for my own memory bank :) 

 gallery carousel 1

gallery carousel 2

gallery carousel 3

gallery carousel 4

gallery carousel 5

gallery carousel 6

 

 

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...