Jump to content
Sign in to follow this  
marquis

Damn Drifter - E30 M52b28 swap

Recommended Posts

I've never posted much about my builds as they never seemed interesting enough (still isn't). To help me track the progress of my build and experience behind the seat, now wouldn't be a bad time to start. 

The build came about when the R/R quarter of my E36 met the wall at Meremere at a drift day. Got too excited chasing some higher HP Nissan's and decided to re-initiate my drift on the straight in a cloud of smoke. This is what she looked like after the impact.

33710707_10156028249629823_8534343722186309632_n.thumb.jpg.470807ff853ad81802ba0def24a1f707.jpg

33805541_10156028249634823_314246161294688256_n.thumb.jpg.d41dc6619655e3e81bad185e927f9224.jpg

 34030051_10156028249674823_125188972304400384_n.thumb.jpg.0671a6e0067518f469fca667e6ddd8a3.jpg

33851547_10156028249659823_7000727981593198592_n.thumb.jpg.3fccbded02a022388cec194f9d8d9c8f.jpg

After the accident, I did a few more events, one being a gymkhana style event held at Hooton Reserve hosted by Sports Car Club NZ. Below is link to one of the videos my mate took. 

This E36 had daily driving duties and handled abuse at the track but was no longer presentable on the exterior for the street (no that it was fancy to start with), so I decided to pull the car apart even though it drove perfecty straight and would serve its purpose on the track. I purchased a donor car which was a non-Airbag and non-ABS model; ideal donor for the next track/street hack and happened to be the same colour for dirty cheap. 

It wasn't long after that I came across an E30 PFL coupe rolling shell. {{And it was at this moment, I f**ked up}} Viewed the rust bucket and thought it wouldn't be too bad of a fix. 

34018839_10156028282164823_1533090835459997696_n.jpg

33864172_10156028282059823_3707688766618468352_n.jpg

33963207_10156028282019823_2965459392134119424_n.thumb.jpg.2412b4cc29b9dcbce337d74b82a9cb69.jpg

33745345_10156028282099823_3096012898850308096_n.thumb.jpg.a44b629899133cf876169e2f08e31c80.jpg

Being my 5th E30 I've owned and in the worst state (to this day, @Jibs05 still gives me crap about and will forever) I wanted to build this to tick all the boxes I wanted in an E30. It took a bit to get the ball rolling for this one but within a couple of months, I sent it off to Quest Fabrication for a bad ass cage.  Super stoked with the final result, bar Motorsport NZ taking so long to communicate a we issue with stitch welding that the cage is now got some surface rust...not going to be a fun time prepping for paint.

33846806_10156028316199823_8567942078816845824_n.thumb.jpg.63c70868801ac6b885f2364131e45ad9.jpg

33869706_10156028316174823_4099971567398682624_n.thumb.jpg.930288ed4d901dc26d5145fa1b3b687f.jpg 

33846806_10156028316199823_8567942078816845824_n.thumb.jpg.63c70868801ac6b885f2364131e45ad9.jpg

Over the past couple of months, I've been cracking away at it slowly putting it back together for a drift day at Evergreen Drift Park in a couple of weeks which I've been itching to drive after seeing everyone enjoy themselves. 

Cheers for reading guys. Will post updates slowly as I make more progress :)

 

33849140_10156028316229823_3053530157554860032_n.jpg

Edited by marquis
Correcting order of photos
  • Like 11

Share this post


Link to post
Share on other sites

Eventually will get some boost in my life. But aim now is to iron out the teething issues and learn the setup

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...