illa02 0 Report post Posted May 10, 2020 (edited) Can anyone recommend a good place for guard rolling in Auckland please? Edited May 10, 2020 by illa02 Quote Share this post Link to post Share on other sites
qube 3568 Report post Posted May 10, 2020 literally any mag shop should be able to do it. Ive used Autostance in East Tamaki in the past. the best is if you do it yourself carefully and slowly rather than paying someone to do a rushed job but it can be quite involved to DIY and you need to roller of course. and jack stands etc to lift the car and remove the wheel etc. Quote Share this post Link to post Share on other sites
Jacob 6 Report post Posted June 17, 2020 Autostance always do a good job, not cheap but they know what they are doing. Helped dial in my fitment. Quote Share this post Link to post Share on other sites
zero 1160 Report post Posted June 18, 2020 @Jacob What did they charge you? Quote Share this post Link to post Share on other sites
Jacob 6 Report post Posted June 23, 2020 @zero think it was around $120 per guard Quote Share this post Link to post Share on other sites
qube 3568 Report post Posted June 23, 2020 8 hours ago, Jacob said: @zero think it was around $120 per guard lolwut? that works out to be like $1000/hr for labour. cant be right. its a 30 min job. 1 hour tops. Quote Share this post Link to post Share on other sites
zero 1160 Report post Posted June 24, 2020 To do it properly takes longer than 30min per guard, because if you move it too fast the metal warps or the paint cracks or both. And in the rear (of the e46's at least) there is a rubber piece which needs removing which is a total pita. Quote Share this post Link to post Share on other sites
