325_driver 422 Report post Posted June 12, 2021 (edited) So i'm chasing down some rough start issues, and the last remaining error on ISTA is to do with EKPS from my motor swap of a 325i into a 320i I popped off the back right panel to find it, and nothing doesn't even look like any associated wiring should look like this can i safely assume the 320i DOES NOT have one and the 323i, 325i, 330i onwards do Edited June 12, 2021 by 325_driver Quote Share this post Link to post Share on other sites
exextatic 117 Report post Posted June 12, 2021 N46 doesn't have one; it'll need to be retrofitted (PT-CAN to JBE, 15WUP to CAS, power to JB and ground). Make sure to get the bracket as well as the module. Quote Share this post Link to post Share on other sites
325_driver 422 Report post Posted June 12, 2021 @exextatic yeah, interior is coming out anyway as i'm swapping my leather in looks like it's loom time! I found that some 320i do have it, but they aren't n46, they are n43 https://www.realoem.com/bmw/enUS/partxref?id=VS12-EUR-11-2005-E91-BMW-325i&mg=16&sg=15&diagId=16_0598&q=16147229173&series=E91 Thanks for confirming this! Quote Share this post Link to post Share on other sites
