SmackJackTheCrackerMan 54 Report post Posted February 25, 2023 Hi all, I'm currently doing some routine maintenance and changing my Oil pan gasket. When I was putting the oil pan back on, half of a bolt dropped into the oil pan (see photo attached) not actually mine but the exact same situation I have found a replacement bolt kit on FCP, but I'm not 100% sure exactly which one I require. https://www.fcpeuro.com/products/bmw-screw-set-aluminum-11410426472#description Includes the following bolts: x6 11417529984 - Torx screw M8X31-AL - Oil Pump To Bed Plate - 10Nm + 90° x1 13627530413 - Torx screw M6X16-AL - Chain Module to Oil Pump and Block - 4Nm + 45° x1 11117528896 - ASA-Bolt M8X37-AL, AW - Bed Plate - 10Nm + 90° x7 11137529982 - ASA-Bolt M6X20-AL,AW - Oil Deflector to Bed Plate - 4Nm + 90° x4 11417529981 - ASA-Bolt M6X30-AL,AW - Oil Pickup to Bed Plate - 4Nm + 100° x1 11417529983 - ASA-Bolt M8X123-AL-AW - Oil Pump To Bed Plate - 10Nm + 180° N54 Oil pump.webp Oil pump bolt kit.webp Quote Share this post Link to post Share on other sites
