e34 lowering

[Brad1138 0]

Hey,

Just had my e34 lowered, in my opinion its no where near low enough. 3cm in the front, nothing in the back. basically looks standard. wondering what you guys have done to get more drop, saw off a coil or compressing the springs? it rides basically the same aswell. im pretty dissapointed. what else can i do? thanks for the help in advance.

[BM WORLD 1258]

should look something like this

[BM WORLD 1258]

low

[BM WORLD 1258]

very low when towing 2 tons

[Brad1138 0]

yeah its the same height as the first one pretty much, you know any tricks to get it lower? aparantly if the springs are any smaller they become uncaptive.

[bravo 34]

If yo want lower springs and captivity is a problem then you need to also purchase shortened shocks so as to limit the suspension travel.

Lopping off a coil (DON'T!!!!) or compressing the spring (generally not recommended) will give the same problems regarding captivity as shorter springs.

[ED1RTY 2]

Makita one way adjustables!!!!

[kiwi535 538]

yeah its the same height as the first one pretty much, you know any tricks to get it lower? aparantly if the springs are any smaller they become uncaptive.

do you want a hole in the sump?

[bmwsparkle 3]

do you want a hole in the sump?

haha fully. Feel my burn etc. A thin alloy brick that hangs down in front of the crossmember = one of the pain in the arse m30 designs

[Brad1138 0]

I dont think hitting the sump is a problem at all, its still 16cm above the ground.

[bmwsparkle 3]

hah, thats ok, thats what mine was before owering with the standard 20mm drop mtech springs, is now 80mm off the ground with the jamexs, hah.