E63 56 Report post Posted December 21, 2023 (edited) 40 minutes ago, Z3bra said: Hi, yep, there's Prestige Motorsport in Seaview, that's where I got mine done. Cheers mate, I'll give them a ring and see if the price is reasonable. Edited December 21, 2023 by E63 Quote Share this post Link to post Share on other sites
charles28 122 Report post Posted June 26 Small update: Went back to the Dyno last week with a new tune. I am now using MHD+ Multi Map, as having just one full send map isn't that useful, especially this time of the year. Map 1: 16psi made 427whp and 577nm (This map is all I need on the street). Map 2: 21psi made 476whp and 663nm Map 3: 26psi Made 565whp and 863nm. You can however see quite a nasty dip up top especially on the high power map. (that map was actually 560whp and 808nm). This is likely a vanos tuning issue, my tuner has sent another revision, but also a result of timing corrections. I flash my old tune, which is the grey line on the dyno sheet, however the power still dropped off and has a dangerous amount of torque down low (Bendy Rod zone). The car pulled a bit of timing up top which robbed power, the ramp rate on the dyno was 2x more than doing a 4th gear street pull and the load was set to heavy on the Dynapack. The timing corrections are a lot better on the street. 4 Quote Share this post Link to post Share on other sites
darren_mk 60 Report post Posted June 27 Nice work, How easy is it to change maps? 1 Quote Share this post Link to post Share on other sites
charles28 122 Report post Posted June 29 On 6/27/2024 at 5:24 PM, darren_mk said: Nice work, How easy is it to change maps? All I do is hold volume down and channel down buttons on steering wheel for a second and then select map with volume up and down, it's instant, rpm needle changes position so you know which map you selected. 1 Quote Share this post Link to post Share on other sites
