Jump to content

Huttey

Members
  • Content Count

    246
  • Joined

  • Last visited

Posts posted by Huttey


  1. Team can you keep a look out for a Silver 1999 540 (debadged) registration number is "606". The car was stolen yesterday afternoon from The Terrace in Wellington.

    I'm puzzled how they get around the door being double locked and engine being immobilised.

    Hope you see it somewhere.

    Regards Pete


  2. You scored a total of 44

    The Lively Center of Attention

    Others see you as fresh, lively, charming, amusing, practical, and always interesting; someone who's constantly in the center of attention, but sufficiently well-balanced not to let it go to their head. They also see you as kind, considerate, and understanding; someone who'll always cheer them up and help them out.


  3. If your reverse camera is NTSC, then it will plug straight in.

    If it is PAL, then you need to reprogram the video module to accept PAL reverse camera. Use my NavCoder software to do this. BMW cannot - they don't have the ability !!

    Jochen, interested in your comment above, when I did mine I could never get the camera working on reverse although it did work when connected to video input. The Camera was supposed to be both NTSC and PAL but seemed to only work on PAL. How do you use your software to change the settings and what else is required.


  4. Sound like mine, removed ABS pump and sent it to

    I have covered this before in previous threads.

    If the ABS is coming up with speed sensor faults, drive the car with the scanner and check live data. If all 4 speed sensors are reading properly and within a 2km speed range at 30kph, the fault is in the circuit board in the ABS control unit. This is very easy to check by an experienced person. Also make sure that tyres sizes are correct, these can also give an ABS fault. Also to confirm its not the sensor, swap them and recheck. There are DIY info on the internet to do this. If you are not comfortable doing this yourself. Get a local brake specialist to take it off for you and send it to Rob:

    Powerstop Engineering

    Unit 3

    2 Wilrose Place

    Tauranga

    Ph. (07) 5788909

    Approx $370

    Rob will repair the circuit board, flush the pump, check activation, clear memory fault codes and give a 12 month warranty and he does a very neat job too. You cant tell its been apart. All this in two vdays, pack safely when you sevd.

    Then get the brake specialist to refit it and bleed the brakes for you

    All done and not too painfull $$$$Sound like mine, removed ABS pump and sent it to

    Hope this helps

    Cheers


  5. Try this

    Mark I

    · Set ignition to pos. II

    • enter TV mode
    • enter "settings"
    • enter "contrast"
    • when the green contrast bar is visible, push the knob and keep it pressed
    • turn ignition off (keep button pressed!)
    • wait 8-10 seconds (timing must be accurate!)
    • release the knob
    • turn on ignition again
    • Now you can watch TV during driving (but always keep at least one eye on the road - that said)
    To watch videotext use the same procedure as above, but chose "brightness" instead of "contrast" (thanks to Herbert Posner, who discovered this secret).

    Mark II

    · Set ignition to pos. II

    • enter TV mode
    • enter "settings"
    • enter "brightness"
    • when the green contrast bar is visible, push the knob and keep it pressed
    • turn ignition off (keep button pressed!)
    • wait 8-10 seconds (timing must be accurate!)
    • release the knob
    • turn on ignition again
    • Now you can watch TV during driving (but always keep at least one eye on the road - that said)
    To watch videotext use the same procedure as above, but chose "colour" instead of "brightness".
×
×
  • Create New...