Eddie

^^ and that means what?

A bit of an update. I started machining up a plate for the base of the manifold this week. I will have to wait to get the engine in to see the angle the carbs are going to sit on before finishing it.

I met craig (a guy on this forum with a 2002) and he mentioned about using a Mega Squirt ecu for the timing on the M44. I have done some searching on the net and this looks like it could be the way to go, as they are dam cheap.

Picked up a gearbox, plus a cross member that's not bent.

I started on modifying the chassis rails on the car today to fit the E36 cross member.

I will post some pictures once this site lets me

"Upload failed. Please ask the administrator to ensure the uploads directory is available"???

and some new control arms

Picked up some more things for the car over the last few days

Some wheels

Carbs it is- But I think I will be making my own manifold. First quote back for a side draft manifold was $495 US

The Daily run about

I took some measurements for the E36 front sub frame mounts tonight. I used a string line running the length of the car parallel to the floor plan and then used that as a base line to measure the mounting points.

Attached is a drawing of the E36 measurements.(not scale)

Here's another thought for the M44. I was given a super charger today

Twin carbs or supercharger

Oh yeah that was me. Trying something that didn't work.

It worked, a guy came over and asked who you were. Apparently he worked for Green acres and wanted to know if you were looking for a job.

The assembled shock. The adjustable platform (the threaded part) is only tacked on at this point I will make it more permanent once the car has some weight in it and then a ride height can be determined

I have a heap of springs left over from when I was rallying. These are some 250lb springs that I will try first, but I'm leaning more to maybe 350lb.

The plan here is to insert the 2002 tube inside the E36 strut. The bottom of the 2002 strut has be enlarged and then machined to be a tight fit inside the E36 tube. The top of the 2002 tube will then be welded to the E36 tube and then only the tread for shock retaining nut will be left sticking out the top.

Next was to machine off the old spring mounts

Firstly I cut the 2002 strut at the base and then cut the E36 20mm from the top of the strut tube and removed the shock

The E36 front struts I have were non serviceable units so these would have to be changed or upgraded. Since I already had installed koni shocks in the 2002 struts I decided to keep these and modify the E36 strut so the koni's will fit.

The original 2002 strut

Would any one have some engine mounts for a E36 M44 engine. I need both the rubber mounts and the ali ones that bolt to the block.

Good news and bad news tonight.

Good news- The M44 came out tonight. After just having a quick measure up of the E36 front sub frame it should be able to be mounted in place of the old 2002 sub frame. Will just have to install new mount points. The front sub frame will be about 10mm lower than in the E36. Will check this again once the engine and gearbox are in place to see if I can move it up. The strut towers measure up the same so hopefully these will stay the same (untouched)

Bad news- Due to the E36 having been in crash, both engine mounts rubber and ali (mounts to the block) are broken on both sides, also the sub frame may be bent.

Blew town this weekend so nothing got done, Did however pick up some top camber plates

Cool- Are you going to stay with the factory Ecu or change it?

I'm not sure if this is the right place for this-

I realize that the springs are controlled in the E30 class but does any one know what the spring rates are?

feeling those wheels

What is the bent bit painted blue in the third picture?

I need to go and see if I can get the side inserts cut down about 25-30mm

If you decide to sell it - give me a call.

If you get the master cylinder(s) right they stop fairly well without boosters. (I don't run boosters on my 2002)

Yes- I've only got master cylinders in the GTR, and it stops

It just would be nice to refine the brake peddle feel even if it is a lot of extra work.

I can't get much access to the front of the E36 to start pulling the motor and sub frame out at the moment. A mate is going to come around next week with his Hi-ab to move the car and lift out the motor.

I am preparing for the worst as the car has a lot of frontal damage.

On a more positive note tonight I welded up the rear subframe sleeves where they came up through the rear floor. Then wire brushed up all the surface rust (which wasn't as bad as I first thought) and brushed on some Black Guard rust killer.

I starting putting in the rear seats out of the E36 just to see if it all would fit and its looking good at this point