Paragon

Up for sale is my 320i Touring NZ new 1989. Alpine white. Automatic. New wof and one months rego. Make no mistake this car has had a hard life. The speedo shows 333,000. If you are looking for “ mint “, tidy, type of descriptions, this is not the one for you. Its for sale. It needs a bit of work. I have renewed the headlining and replaced the sunroof which was quite a job but there is still more to be done. Work in the last 6 months : inner steering joints engine mounts x 2 gearbox mounts right rear wheel bearing rubber intake boot headlining Replaced parts : diff, sunroof mechanism, The body is basically straight but does have the odd scrape and small dent. There has been some bog applied in the past, left rear corner. It drives okay and may have the original engine. The interior is rough. Mega cracked dash, shot front seats, rooted carpet. However I have some decent carpet and front seats that come with it. All yours for £3900. The only swap I will do is for cash, $3900 worth. Location South Auckland. PM me.

Can am and boss sold - still got the M tech and Sparco

Bump - price now $60

Price drop on the Mtech, now $150 All still for sale

what sort of condition and how much ?

Any pics of the seats ?

260 gearbox for sale. Out of a 520i, an early E34 I believe. I have never used it so I can't comment on its quietness etc. Casting number 260 0 1346 91, it cannot take a crank sensor. Ratios are the same as a 325, we compared them on the bench with a 325 box. The only difference is the guibo mount is about 2cm longer. To fit into an E30 this would have to be changed over. Location south Auckland, $400

Pretty much as per title - looking for a pair of fog blanking plates for a facelift and a pre facelift. Prices please and include shipping to Auckland.

Various steering wheels up for grabs. all can be posted for $15 nationwide. Tech 1 some marks, it was on road car once ! Centre to centre 365mm, edge to edge 384mm $160 Can Am used leather wheel with slight dish, about 3 cm. Tidy, could do with a good clean. centre to centre 320mm $60 a Sparco Volante - new Racing wheel for those with limited room. Black suede. Drilled for the usual 6 bolt pattern. $250 E30 boss Multiple threads in the top to take 6 bolt pattern $50 Location south Auckland, pm me !

E28 rear tail light for sale. Used, it has a registration number etched in to the reflector. $60, plus shipping which I am guessing would be $15 or pick up south auckland.

The effectiveness of any data logging is all down to how good the software is ( or not ). Most punters get taken in by the shiny hardware because they can understand that and touch it, feel it. Start off simple and build up. For example the single most useful channel is speed, you can learn a lot from overlaying just speed from different laps. Once you have that sorted add throttle, then maybe G, see if all corners have about the same peak G, see that left and right are the same peak, if not look around, why aren't they the same ? turning in too aggressively ? Later to improve lap times add brake pressure. But it is all down to the software. Cameras can be useful if you are still trying to find the correct line. However good data loggers with gps have this covered because they can be quite accurate for a single day.

I have a pair of Sparco ProADV seats. One has been used at Hampton for about 3 hours, the other never fitted. $900 each. Also spare outer fabric new. Set of TRS 3 inch belts, 5 point. FIA dated 2010. These have been used for 2 days in a corporate track day event. $250 Some where I also have a Sparco race steering wheel and a couple of E30 bosses to fit Stilo helmet, complies with new Snell standard, full face, alpines stars gloves, small PM me

Looking for 1) all the internal gubbins to make a manual winder sunroof work 2) brake / clutch pedal assembly for a manual transmission conversion. 3) rear cover / back seat / any stuff out the back of a touring thanks Andrew

Greg. and HellBM pm me a delivered price and how you like to be paid

Wanted - 55 pin ECU, cheap, dead or alive 55 pin are on the later motronic 1.1 or 1.3 pick up in the Auckland area, or happy to pay postage.

bumpity bump still looking for a sunroof that winds back

does the sunroof work properly mechanically - wind back and forward, tilt at the rear ?

How much for a complete manual ?

Still need a sunroof. I will buy a whole / part car if necessary

Wanted a complete operational sunroof. The outside panel is not that important if you want it to weld back in, it unbolts easy enough. cheers

I have a M3 that needs some TLC. 1989 215hp no cat model. An international traveller it has been used in Germany, UK and then abused in Portugal where it had use as a track day car. Imported into NZ in 2010 but it has never had the work done to register it here. Alpine white. It is missing some interior parts such as the fog lights, A pillar covers, radio and headlining. Some history, only UK stuff. It is not mint, it needs work, but at least it is in the country and it is a real one. PM me if it is of interest,

Can you give me a outside diameter and an inside diameter and I will sort you out a price

The current touring project is looking for : manual clutch / brake pedal and mounting 14 inch wheels that are not bent, bottletops are fine seats that need recovering, that is, no problem if the fabric is worn, but the mechanicals and back / sides have to be in good order. Touring rear parts, carpets, washer bottle, any thing from the C pillar back preferably close to Auckland A whole / nearly complete car could be considered. cheers

Zero in NZ, 92,000 miles in UK.

There is a S50B32 taking up space in my garage, out of a UK car. Complete less ECU. I would take $4000 for it.