E36 318ti suspension need help!!!

[pennyfan 0]

Hi all, I am new to this forum, need some help on the suspension of my E36 318Ti.

All I know about the TI suspension is, the front one is the same as rest of the E36, but the rear one is the same as E30 rear suspension.

While I am trying to get a set of hi-lo kit from local suspension store, they cannot find TI on their application list, then I told the guy to order E36 front and E30 rear for me, He said the nasty supplier only sell them as a set n cannot take separate order.

Now my only hope is to ordering a full set of hi-lo kit for the Z3 chassis, I once heard about the Z3 chassis is similar to 318TI's (E36 front E30 rear), does anyone here know about it?

thank you very much

Edited June 24, 2008 by Penny

[*Glenn* 854]

Hi all, I am new to this forum, need some help on the suspension of my E36 318Ti.

All I know about the TI suspension is, the front one is the same as rest of the E36, but the rear one is the same as E30 rear suspension.

While I am trying to get a set of hi-lo kit from local suspension store, they cannot find TI on their application list, then I told the guy to order E36 front and E30 rear for me, He said the nasty supplier only sell them as a set n cannot take separate order.

Now my only hope is the ordering a full set of hi-lo kit for the Z3 chassis, I once heard about the Z3 chassis is similar to 318TI's (E36 front E30 rear), does anyone here know about it?

thank you very much

Talk to Keith & H&R our sponsors here. Ph. 021378902. Then give me a call or vice versa

my number is (09) 2722546

Cheers

Glenn

BTW I have a TI too

Ooops...welcome to the forum

[pennyfan 0]

Thanks for the quick reply. I will contact him.

Its difficult bcos last owner had engine conversion so its a 6 cylinder 3.0 front. much heavier.. otherwise I can just

get koni or bilstein sport package.

What do you have for me?

[steve R 0]

you bought the ti with the 3liter out of an e46 in it?

[pennyfan 0]

Yes, i bought it off someone in Hamilton. E46 330 engine (M54) with 5sp box.

[PBOY23 0]

NZs fastest TI?

[JiB 0]

Otherwise you could try the Ground Control guys in the US. Quality stuff and they would probably let you order E36 fronts and E30 rear.

[HELLBM 1557]

Complete Bilstien package (certed) on my compact.

[Braeden320 0]

^^^That looks bloody cool! I usually don't like the ti but that looks good ray.

[Yuen 16]

So you bought that Ti! I'm assuming it goes very well

Edited June 24, 2008 by Mpulsive

[*Glenn* 854]

Yes, i bought it off someone in Hamilton. E46 330 engine (M54) with 5sp box.

I've done a conversion on mine too. I'm running a M52 B28. I'm using Bilsteins out of an E36 328 Coupe. I had to shorten the rear shocks and I used H&R springs through Keith at H&R

Check this:

http://www.bimmersport.co.nz/forums/index.php?showtopic=8117

As I said before ring me or Keith for the right advice

BTW... has your car been certed yet ??? I understand the previous owner had problems.

Edited June 24, 2008 by botanymotorworx

[*Glenn* 854]

BTW Penny....bring it to the drag meeting next month

[pennyfan 0]

Mm. I haven't been cert, what kind of problem? engine or shock or else?

I drove it back to Auckland from Hamilton and seen fine. Tell me what you know about it pls. Thank you

[*Glenn* 854]

Mm. I haven't been cert, what kind of problem? engine or shock or else?

I drove it back to Auckland from Hamilton and seen fine. Tell me what you know about it pls. Thank you

Ring me (09)2722546

PS: I dont have caller ID if your too scared to ring me

Edited June 25, 2008 by botanymotorworx

[pennyfan 0]

Ha, I am not scared, you are very nice and being very helpful.

Keith is helping me out the suspension now. I will post pics and detail once I got the deal done.

Thanks Glenn and everyone here.