gauges still not working

[pommy 33]

I have already started a topic re my gauges not working!!!!!

there was alot of help my rev counter and temp gauges are not working I took the gauges out last week and gave em a spray of contact cleaner! everything seemed to be in tacked the fuses are fine was wondering if anyone had any other suggestions thanks?

[Forrest 35]

Have you checked the ground wire for the instrument cluster? I can' t remember where it is, I had similar troubles with the backlight of my cluster.

Also fuses? Obviously you have.

The nuts on the back of the gauges where it tightens to the back of the cluster tight?

[User Name 19]

You can always Jimmy wires from the sensors etc to check if its a break in the wiring somewhere, i tried following mine to the relays etc and somewhere was still not working

so jimmied some test wires and presto they work so just found somewhere were the gauge was getting powered and just added my wire to bypass the break

[Mark 178]

Have you pulled out the Service Indicator board and checked it's OK? The batteries on these die and can leak acid onto the circuit board causing havoc with the gauges.

[pommy 33]

Have you pulled out the Service Indicator board and checked it's OK? The batteries on these die and can leak acid onto the circuit board causing havoc with the gauges.

Yeah I did that seemed all ok? cheers for your help!

[pommy 33]

You can always Jimmy wires from the sensors etc to check if its a break in the wiring somewhere, i tried following mine to the relays etc and somewhere was still not working

so jimmied some test wires and presto they work so just found somewhere were the gauge was getting powered and just added my wire to bypass the break

Cheers for your help Il try and have a look I might have to get an auto sparky Im rubbish with electrics!