WTB. E36 manual pedal box

[Deano 1]

Hi

Looking for manual pedal box for E36 325.

Or just the clutch pedal and slave cylinder

I have an E30 manual pedal box could do a part swap

Cheers

Edited May 25, 2010 by Deano

[*Glenn* 854]

Manual & Auto pedal boxes are the same on a E36. You'll need brake & clutch pedals, clutch pedal return spring, clutch master cylinder, pedal pin & clips, fluid supply hose from brake master cylinder, firewall grommet & the firewall pipe going to the clutch slave cylinder hose if your doing a manual conversion. It might be hard getting these as no one wants to break up a manual conversion kit. You could try Ray @ HELLBM though, he might be able to help.

[Deano 1]

Manual & Auto pedal boxes are the same on a E36. You'll need brake & clutch pedals, clutch pedal return spring, clutch master cylinder, pedal pin & clips, fluid supply hose from brake master cylinder, firewall grommet & the firewall pipe going to the clutch slave cylinder hose if your doing a manual conversion. It might be hard getting these as no one wants to break up a manual conversion kit. You could try Ray @ HELLBM though, he might be able to help.

Thanks Glen.

I see on Ebay there is a guy selling clutch pedals on there own for $15 US. I have an E30 manual pedal box, its very different but the master cylinder looks similar and maybe able to use some of the hardware..just checking at this stage

[westy 614]

What you need to look out for is that the clutch hardline from the master to the slave cylinder has two different fittings on the master cylinder end.

One is a clip on type (later) and one is a threaded type (earlier).

The clip on type is the only one avaliable new.

I dont know if the e30 master is useable but it only has the threaded connection.

Does that make any sense? ha.

[BM WORLD 1283]

pedals from a left hand drive wont work . needs to be from a rhd car