What Getrag Gearbox?

[bmpower 3]

I have a manual gearbox from an e36 325i. It has the following numbers on it. Which gearbox is it? Everything i've read says its probably a 250g?

Getrag

042

225

220.0.00225.97

Can anyone in the know help? Also will this bolt up to all m50/m52 engines?

Thanks.

[kerry 10]

its not a 250g as far as im aware, i run the same box in my e30, still a great box non the less.. will fit all listed m20 shifter and mount angle is wrong though and direct fit to m40,42,43,44,m50,52,54..

Edited October 30, 2010 by kerry

[sp8s 1]

Getrag ID site

[Ben 0]

If it came off an m50 it would be safe to presume it would go back on any m50.

Pretty sure bell housing bolt spacing is the same through all m50/52 engines,

If its a replacement for an 328i/m3 you would need to use getrag linkages

as ZF linkages on 328i/m3 are different apparently.

I have a spare m50b20 block lying around if you want to check that it bolts up.

[bmpower 3]

It came off an m50b25, i removed it from the engine. Just wanted to know which box it was. I know it fits m50, and am pretty sure it fits m52/54 just wanted comfirmation. Thanks for the ID site, however doesn't show e36 boxes, just the older ones.

Anyone else know what box it is??

[BM WORLD 1264]

its a getrag 250 , used in most e36 models .

316i 318i 318i 318ti 316ti 320i 323i 325i .( i believe maybe the 325i version is sleightly stronger )

only the 328i and 3L m3 use the ZF box , and maybe some NZ new 325i 320i etc

[bmpower 3]

Thanks Brent - it was from a nz new car, but def Getrag. Am i right in thinking it will bolt up to all m50/52/54 engines?

[westy 614]

Yes.

[bmpower 3]

All i need to know! Cheers Westy!