Andre3000 55 Report post Posted February 28, 2011 I have the opportunity to manufacture a simple 5 stud conversion for all you 5 stud hopefuls out there. Considering that to get m3 control arms, struts and bushes in your hand is a costly and difficult process, I'm hoping to manufacture adapting sleeves for the e30 spindle/any other spindle to achieve the desired stud pattern/hub. Please leave me a comment below if you could be interested in a conversion kit at a reasonable price, hopefully around 600-700 depending on sourcing. Cheers guys!! Quote Share this post Link to post Share on other sites
antil33t 90 Report post Posted February 28, 2011 Registering interest... a bolt on kit would make it easy for lazy pricks like me. I really just want the wheel choice.. Quote Share this post Link to post Share on other sites
polley 916 Report post Posted February 28, 2011 What rotors and calipers would it be using? Quote Share this post Link to post Share on other sites
Andre3000 55 Report post Posted February 28, 2011 What rotors and calipers would it be using? Still in the works, but will be e36 rotor, and either e30 caliper/e36 caliper adapted. Quote Share this post Link to post Share on other sites
E30-323ti 66 Report post Posted February 28, 2011 (edited) My 2c. Don't go for a sleeve type adaptor... If you are going to that effort, making new hubs would be much easier, and can use generic SKF wheel bearings etc... As for brakes, look for something that bolts to the E30 strut (R33 4pots IIRC) and then work back to get the right hub offset to suit the matching rotor. And it would all 'bolt' together. Something like these (but for the E30): HQ ones on TM Edited February 28, 2011 by E30-323ti Quote Share this post Link to post Share on other sites
oscar90 0 Report post Posted March 1, 2011 easy 5 stud yes please!..saw r33 and thought gtr brembos straight away..possible? Quote Share this post Link to post Share on other sites
sascha 17 Report post Posted March 29, 2011 About a month late, but possible interest registered Any comment on if this is going ahead or not? Any progress? Quote Share this post Link to post Share on other sites
Andre3000 55 Report post Posted March 29, 2011 Still in the worx, trying to suss manufacturing, plus still developing designs, will be at least a few months before prototype. Quote Share this post Link to post Share on other sites
Jibs05 86 Report post Posted February 4, 2012 i know this thread is old but. very interested if still available? Quote Share this post Link to post Share on other sites
