b mike w 0 Report post Posted May 19, 2011 hey guys wondering if anyone can help, im looking for someone who does good quality rust repairs preferably in new plymouth but will look in to doing a road trip. im sick of crap jobs done and a few months later it just shows up again. any suggestions will be great. thanks Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted May 19, 2011 There is no real cure for cancer... new panels are the only real fix Quote Share this post Link to post Share on other sites
b mike w 0 Report post Posted May 20, 2011 what do i do when its in the firewall and bottom corners of the footwells? i cant replace those and the people who fix it dont do a very good job. Quote Share this post Link to post Share on other sites
APT 195 Report post Posted May 20, 2011 There is such a thing as a firewall cut, but can be very costly depends how much you want to spend really. Quote Share this post Link to post Share on other sites
dubman 39 Report post Posted May 20, 2011 what do i do when its in the firewall and bottom corners of the footwells? i cant replace those and the people who fix it dont do a very good job. cut out existing infected areas, weld new plate on. thats what my panel beater did. make sure its a good job tho, like Glenn said, no real cure Quote Share this post Link to post Share on other sites
Wom 0 Report post Posted May 20, 2011 you gotta be willing to be the $$$$ if you want a really good job Quote Share this post Link to post Share on other sites
_Matt_ 42 Report post Posted May 20, 2011 Rust is like cancer in some ways. In my opinion rust is a lot easier to cut out then cancer. At least you know you've cut out all the rust As has been said. cut it out, leave nothing behind. Quote Share this post Link to post Share on other sites
Braeden320 0 Report post Posted May 20, 2011 I can recommend Terry's Panel Shop in New Plymouth, Looks like nothing when you go there but the guys workmanship is top stuff. I had shitloads of work done on my old ST220 Mondeo done there, I wanted it looking perfect and it did when they were finished with it. Would go back in a heartbeat, They take alot of pride in there workmanship and do not charge the earth. Quote Share this post Link to post Share on other sites
b mike w 0 Report post Posted May 21, 2011 (edited) I can recommend Terry's Panel Shop in New Plymouth, Looks like nothing when you go there but the guys workmanship is top stuff. I had shitloads of work done on my old ST220 Mondeo done there, I wanted it looking perfect and it did when they were finished with it. Would go back in a heartbeat, They take alot of pride in there workmanship and do not charge the earth. Thanks Braeden i'll check it out Edited May 21, 2011 by NP E30 Quote Share this post Link to post Share on other sites
Matty104 0 Report post Posted May 21, 2011 I can reccomend terrys too,I had a cut and weld job for my last wof, they did a great job for a good price Quote Share this post Link to post Share on other sites
