Have a read and tell me if it's really true

[aliluya 0]

Ok i've been reading this post on Toyspeed about this Race BMW bottoming out when driving, can some of you more knowledgable people read the post and tell me if he's got it tuned properly or is he just got a crap car ??

[aliluya 0]

ops forgot the site ..

http://forums.toyspeed.org.nz/viewtopic.ph...=asc&highlight=

[E30stz 0]

by owning such a modified car it'd be very hard to avoid the popos.

Edited August 19, 2005 by E30stz

[Gus 5]

50mm suspension setup? somethings bound to hit the ground

[Dnz 0]

Sparks = Hawt.

I guess that nowadays anything slightly modified will be checked..

[aliluya 0]

I see you joined up to Toyspeed just to post .. hah

[westy 614]

I thought 100mm to structural was min???

Lesson.Never start bitch thread when your dicey to start with.

[*sic 1]

what a stunner.

[aliluya 0]

I thought 100mm to structural was min???

Lesson.Never start bitch thread when your dicey to start with.

According to him 100mm is the legal high without certification, and anything under 100mm need certs ...

[kiwi535 538]

i think a few porkys are being told here

all done by BMW

Its all from germany mtech stuff

50mm clearance

no daily driver atm

skid plate underneath ha

how many times will i get pulled over this weekend

I dont want to change it for the track this weekend

[bemmaboi 0]

How did he get 50mm from the ground with track setup? I mean X2BUMP is 55mm from ground with honda and cuts and i thought that was bump stop's etc.

Might be coil overs but wouldnt have thought that it could take it past bump stops can it?

[Grant 4]

What's that smell....

Thats it....

Bullshit.

[aliluya 0]

But does anyone have any proof that it's bullshit so that i can post it back onto ToySpeed ....

[BMW POWER 2]

But does anyone have any proof that it's bullshit so that i can post it back onto ToySpeed ....

What are you doing on Toyspeed anyway?

[Grant 4]

But does anyone have any proof that it's bullshit so that i can post it back onto ToySpeed ....

Why post back?

Let him bask in his own bullshit if it makes him feel like more of a man.

sh*t...he impresses me....

Cheers

Grant

[325GRANT 0]

What's that smell....

Thats it....

Bullshit.

classic........

that guy is a tool!

[aliluya 0]

What are you doing on Toyspeed anyway?

Because i'm a fan of Toyota's aswell, and also the fact some of the people there are also nice people .....

[smokenbaby 0]

The guy needs his head read. It is impossable to have an E30 as low as he has and still have any suspension movement on the back. If the set-up was the best dogs bollocks then the factory DTM and Groupe A cars would have been set up that low. He will also find out very quickly that MANZ (NZ Motorsport) Will not allow him to race at the ride height in any tin top class (Other than clubmans maybe) as they have a minimum ride height. This is measure by removing the air out of both wheels on the same side of the car. Nothing on the car is allow to touch the ground other than the tires.

Plus, if he is real lucky to have any movement in the rear, he will have such a short stroke on the rear shocks/spring that would deam themuseless as they wont even have the time to dampen the bump/rebound. The springs would look more like a bent piece if wire and nothing like a spring.

Good for him, we just might be rid of another dropkick on the roads.

Edited August 21, 2005 by smokenbaby

[westy 614]

The guy needs his head read.

Good for him, we just might be rid of another dropkick on the roads.

Long as he dosnt take anyone else out with him!!

[Palazzo 438]

Best I can measure it, the convertible is now 110mm (to underside of sill rails) and on a trip down to Raglan on the weekend, I was having to drive around dead possums to save the front spoiler. 50mm?? What a tool! Or a liar?