_ethrty-Andy_ 2122 Report post Posted June 7, 2014 (edited) Hey guys! I know some of the basic stuff you can obviously see, like the rear suspension is more like E30 etc compared to normal E36, dashboard different etc Am interested to know what the front panels/bumper/bonnet/lights etc are cross compatible with, are they E36 Ti specific, or same as coupe etc? What about doors? Wikipedia suggests they are the same from the A pillar forward as a sedan, but then other sources disagree etc Cheers! Edit: not sure what year this car is, but has airbag and EWS so probably a later one Edited June 7, 2014 by _Ethrty-Andy_ Quote Share this post Link to post Share on other sites
Cheyne 17 Report post Posted June 8, 2014 (edited) According to the part numbers the bonnet, front wings etc are the same as the sedan/touring, not the coupe. The doors are specific to the Compacts. Edited June 8, 2014 by Cheyne Quote Share this post Link to post Share on other sites
BM WORLD 1264 Report post Posted June 8, 2014 whole front end is the same as a sedan , touring etc windscreen is the same also etc coupe and convertible share the same panels. all front bumpers , side skirts are the same ti has a different rear bumper Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2122 Report post Posted June 9, 2014 (edited) sweet cheers! picked it up today. Another one to add to the pile of don't know what to do with them haha Aparently EWS issues, but interior and engine has all been pulled apart chasing it by someone that doesn't know what they are doing, but seems to be all there!? but was virtually given it so can't say no. getting quite the reputation lol Edit: chassis is AL10854 Edited June 9, 2014 by _Ethrty-Andy_ Quote Share this post Link to post Share on other sites
yng_750 247 Report post Posted June 9, 2014 Murphys law. Put it all back together and it will start first pop. Or do a m52 conversion Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2122 Report post Posted June 9, 2014 (edited) Murphys law. Put it all back together and it will start first pop. Or do a m52 conversion apparently it has had the EWS system recoded etc etc so may prove hard unless i import an E30 M42 DME, which i don't even know if it would work. also dereg too. racecar??? its already painted Calypsot red like the rest of my fleet lol has been sitting at my neighbours down at work, which they moved out and we took over the lease, and they left it there with some other stuff etc. said we could have whats there. Edited June 9, 2014 by _Ethrty-Andy_ Quote Share this post Link to post Share on other sites
Ahmedsinc 414 Report post Posted June 9, 2014 V8 / FI M5x project or strip it for parts. Would be good to see some competition for Glenn though! Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2122 Report post Posted June 9, 2014 V8 / FI M5x project or strip it for parts. Would be good to see some competition for Glenn though! haha there are a few quick compacts on here now! dunno. as much as i don't really like the shape etc a nuggety little track weapon appeals lol Quote Share this post Link to post Share on other sites
hybrid 1039 Report post Posted June 9, 2014 Ray did one with a whole e36 evo m3 rear end (diff etc) .. jesus christ it was a fun car .. even with the m52b28. 3.64 LSD and light flywheel on coil overs and full motorsport body work and manual + evo m3 wheels it was a hell of a riot. We did the wiring and coding for it. Has been sold to an enthusiat. Photos of it in this thread. http://bimmersport.co.nz/topic/46560-hellbm-28-conversions/?hl=328ti Quote Share this post Link to post Share on other sites
BM WORLD 1264 Report post Posted June 9, 2014 yea my mate has one setup for the track , 328ti ,m50 manifold , free flow exhaust,light flywheel, stripped out , very light , 3.64lsd , coilovers , m3 front brakes ,semi slicks etc very quick around a track etc Quote Share this post Link to post Share on other sites
