foggys on pre/f

[Aaron320iSmith 0]

Can i ad foggys to my 85 320i nz new?

[topless 7]

Wiring is normally there to add front fogs. Check under dash on loom to light switch for a rectangular plug. If it is there you will find the foglight plugs in the engine bay behind the headlights on both sides. Pic shows foglight switch plug under dash and light plug (arrowed) in engine bay.

[petone 0]

you also need to add the relays and fuses. The plugs for the foglight switch might be slightly different, nothing some pliers can't fix though.

[topless 7]

you also need to add the relays and fuses

yea, if you find the wiring is there come back and will give you all the details how to make them work.

[Aaron320iSmith 0]

Yep its all there

[topless 7]

you will need the dash switch, there are 2 types, one for just front fogs and one for front/rear fogs. Also you will need a relay which has double contact points, i.e. both an 87 and an 87b contact. Photo shows both dash switches, double on left and single on right with rear view of both. The relay pic shows the pin config needed.

Refer to pic of fuse box. Relay to go in position K8 (circled), and you will need two 7.5A fuses and put them in positions 29 and 30 as circled.

Of course you will need the foglamps too...

Edited January 2, 2006 by topless

[Aaron320iSmith 0]

Switch is already there, wheres the best place to get the fogys from? repco? Cheers dude thanks for the help

[Guest Andrew]

Switch is already there, wheres the best place to get the fogys from? repco? Cheers dude thanks for the help

a BMW wrecker

[OLLIE 26]

you can custom fit hella fogs if you like