tcbaurpower 5 Report post Posted August 16, 2016 Hi e28 fanatics So I am attempting to remove the 325psi crank nut to replace the timing chain and guides etc on an M30. Engine is on a stand so yeah, great fun. I have locked the flywheel up with a chain and given the breaker bar + longest tube sitting around the garage a go but it is not moving at all. So I turned to google for options (Last time I removed one I could not remember it being this difficult) and what I found was that BMW made a special crank holder tool, which doesn't look to hard to replicate. Has anyone had a go at making this or a similar tool for the job? I am going to give it a try, would anyone be interested in the cad files after I have completed it? Would look to have it water or plasma cut. Quote Share this post Link to post Share on other sites
zero 1162 Report post Posted August 16, 2016 should come undone with a big bar if you lock the flywheel with a big screwdriver. Also will come off with a rattle gun. Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted August 16, 2016 Rattlegun is what I used. Took a bit. Quote Share this post Link to post Share on other sites
tcbaurpower 5 Report post Posted August 17, 2016 Unfortunately my tool collection does not currently include a rattle gun so looking for another simple solution. Also it will be useful for the reinstallation as well. Quote Share this post Link to post Share on other sites
cleanish_e46 207 Report post Posted August 29, 2023 I know this is an old thread, but it might help someone trying to do the same today (as long as we're talking about a similar thing). When I rebuilt the M2O in my E30, I did this: Removing Crankshaft Bolt - E30 Zone Wiki Quote Share this post Link to post Share on other sites
