Desperately need a manual trans for E28 M20 - 260/5

[jonnyony 6]

I purchased a used Getrag 260/5 transmission a while ago but unfortunately it had a very noisy countershaft bearing. I finally decided to pull it apart and the countershaft is toast. This is my daily driver so I need to get it back on the road ASAP. Please let me know if you have a good, smooth shifting, noise free transmission for me!

Thanks.

Edited September 18, 2017 by jonnyony

[gjm 3258]

The 260/6 fitted the M30 engines... Do you need that, or a G260/5 which was used with the M20s?

[jonnyony 6]

Sorry, you are correct. I need the @260/5 for the M20. I'll correct the post now.

[eliongater 718]

Pretty sure they all do that...

 

I've got a 4 speed one (5th is there somewhere) that I'm not currently using. I assume you need one with the two holes in the bell housing for the speed and position sensors?

[gjm 3258]

1 hour ago, jonnyony said:

Sorry, you are correct. I need the @260/5 for the M20. I'll correct the post now.

No worries.
Give Kayne Barrie a call and have a chat - 027 497 5330. He may have something suitable.
 

 

 

[jonnyony 6]

Don't need the sensor holes as its running moronic 1.3. Cheers.

[LemonHunter 583]

2 hours ago, jonnyony said:

Don't need the sensor holes as its running moronic 1.3. Cheers.

Freudian slip or typo?

[jonnyony 6]

Must be the former, I'm not very pleased with the situation.