Jump to content
Sign in to follow this  
Simca

Early e39 540 alternator belt gear

Recommended Posts

Hey guys

Just bought this early (non vanos) e39 540i. Previous owner took a stab at replacing the alternator and lost the belt tensioner and idler pulley and essentially everything to hold it in and the bolts for the alternator.

Sort of almost looking for someone parting out a whole non vanos m62, so i can grab all the alternator belt stuff from it to save myself from spending years trying to accumulate everything.

Any leads would be appreciated

Cheers

Quinn

Share this post


Link to post
Share on other sites
1 hour ago, Palazzo said:

I did find this! Unfortunately I don't know anyone (or anyone well enough, that I could also trust with a spanner) in Tauranga.

Share this post


Link to post
Share on other sites

Ok so, what I need is: 

image.png.6e02029a04e42d9ff19dbdee89e55db9.png

 

Almost everything on this picture.

2 - 11281742013 - Adjusting bracket with pulley
6 - 11281704500 - 70mm Deflection pulley
7 - 07119900236 - Bolt (think this ones fatter than a normal bolt for the bearing stuff
8 - 11281727159 - Cap
9 - 11281704935 - Tension adjust lever (this one I think I'll have the hardest time finding)
12 - 11281736857 - Belt tensioner (this ones just expensive new)
 

the bolts I think I can size up and get locally, maybe I can get the pulleys too but I'll have to do some research. The small adjuster lever bracket is what's scaring me, not a lot of availability around for those.

Share this post


Link to post
Share on other sites

All those parts including bolts are available from schmiedmann for a reasonable price except #12 which is pretty expensive. Buying stuff like that hurts when it's available at a scrapyard for dirt cheap though. There's 4 or 5 at the auckland scrapyards that all have those bits. 

  • Like 1

Share this post


Link to post
Share on other sites

Found this if it helps 

 

image.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Was from an e39 540 non vanos

  • Like 1

Share this post


Link to post
Share on other sites
10 hours ago, moe said:

Found this if it helps 

 

image.jpg

image.thumb.png.d9b674c9865b70f68b4a40f6fb1160d3.png

I believe those bits are for the Air Con system which is separate. Thanks so much, I do appreciate the help. I believe the tensioner itself is the same as on the alternator setup, so if I do end up having to piece it all together I'll get in touch. Having a mate check a yard in Auckland tomorrow that might have some bits.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...