Silver Fox

Think it's the guy who owns the Autodome car sales in Pukekohe? He also built one of the E30 series cars.

I believe they need spacers to run on an E30, probably about 15mm to look the best, otherwise they sit too far in.

Now, that's badass.

Happy Bday Mike, have a good one.

Yep, only native to E46, E36, others need spacers at least, not sure on hubcentric rings?

All the best Guss, have a good one.

Sounds like head gasket, get a leakdown test done, and a co2 test on your radiator, either should tell.

Check this out if you need any inside E28 blue bits, complete interior. http://www.trademe.co.nz/Browse/Listing.aspx?id=164217342

pm'd

Didn't realise your t*ts were that big Glenn?

Thanks, hadn't seen it before, cool car for a 1/4 of a million.

Homemade custom ACM job , nothing like composite Aluminium panel for playing around with.

Front airdam fitted and going orange.... should drop another 60 to 70 mm with the engine in.

Yeah, I've found 16 and 17mm nuts, but on a 12 torx bolt.

Yeah, 2 x 10's on the bottom, and 1 x 10 part way up the side, 1 x 14 on each side, and 2 x 14's at the top. the 2 starter ones are 12's. Jusy trying to be helpful Angus.

M40 needs 10,12,14, M20 from memory is 10 and 14.

Yeah, got $2640 in the end, just gotta wait for the money now? Had it listed with a $2500 buy now when it first went up. Still a good buy for someone if you ask me.

Already have thanks.

Finishes in 8 mins guys, currently at $2020.00, very cheap.

The car's stripped and gutted now, ready for the cage. Front adjustable suspension, with camber plates on top. 750i front calipers, momo 16" wheels.

93 watchers, 1650 plus views, finishes Monday night, don't miss out.

yeah, it's my favourite at the moment as well.

These are a couple I'm thinking of modelling it on.

Got 10 in before it kicked me, good luck.

Shocks come in the same category as rubber bits, bushes and bearings etc, pays to spend a little more and buy new. Sometimes not as much as you expect if you look around. If you think about it, chances are that what you're buying is as old as what you're replacing, and no parts man is going to give you any kind of warranty on that type of part.