slybma

looking good will defiantly be watching, i have a r151f gearbox from a 2006 2wd hilux or altezza 6 speed box if either would suit both going cheap

what about the inside window guide?

aw sorry my mistake that i dont have

silver window guide on drives door? drives door lock? carpet trim below rear seat?

can do these but no door lock sorry $45 incl shipping if you want them

Has that dash only got a few cracks?

And do you have a sump guard on that thing?

Good condition bonnet badge? Maybe

Sorry sump guard sold, and the bonnet badge is no good. Dash has a few cracks not the worst I've seen but still has e few, two larger cracks and four smaller ones

Here are some photos if there is anything youd like thats in the photos just ask

dude, got a sedan Drivers electric window Regulator?

Should still have will check $40 plus shipping if its any good

Hi

where are you based? If in Auckland im interested in the engine

In Napier sorry

Hi guys

I am parting out an 1987 per facelift 320i, it's a South Africa import, bought it just to get a few bit and don't need the rest.

Good engine $120 if you want to remove it otherwise $250

Good auto trans $100

Some bits missing but most still there, let me know what you need and I'll see if I have it

Pictures to follow

Hi there

Has the manual pedal box sold?

is the car still driveable? any idea when the wof expired?

all depends what you hope to do with the car, if your wanting to make some big power then dont bother with the 4

In that case I'd say you'd be fine! Make sure you put up some pics once you're done

Have decided to run 16x10 rears with the 16x8 on the front, wheels coming from the states will post pics once its ready

Pics and location please. Does it come with the manual gearbox and flywheel?

car is in Napier

Pics and location please. Does it come with the manual gearbox and flywheel?

will get pictures up as soon as i can get out to the car, can come with the gearbox and flywheel, even have the old m20b25 ,complete that could go with it has a buggered bottom end, also have another short block

Have an E30 rolling body for sale still pretty much complete is minus the engine and interior, still in the system and WOF until June

$500ono

SLYBMA personalised plate for sale hoping to help raise some funds to finish the car $500 ono

also have a complete E30 318 coupe rolling body for sale still in the system reg on hold $500 ono

is complete minus the engine and gearbox, can include gearbox for a bit extra

I've been told that a 16x9 and 16x10 wheel setup on an E30 can be done with the right camber and guard rolling setup, im looking to have some wheels made but just want to see if anyone else has run this setup before? just want to know what offset will work best and require the least guard work.

Yup zero offset.

Unless you have super stiff suspension you won't get away with having the guards just clearing the wheel, because as soon as someone sits in the back, or you hit a bump/go around a corner, it's going to rub.

I've got Ground Control coilovers, wound nearly right down in those pics.

luckily no back seat cage is in the way, but am hoping to keep it as flush as possible on these wheels, as have different wheels for road use and long drives.

the suspension setup is extremely stiff as is setup for drifting

Yep will fit, don't need excessive camber, but as has been said you'll need to roll the guards.

Here's mine with same spec wheels & tyres: Visit My Website

Running -1 deg camber up front and unknown in rear (just whatever camber came about from lowering it), had some rubbing at that ride height in the pics but none at what it is now (rear approx 10mm higher than pics and front maybe 15-20mm higher).

What suspension are you running?

what suspension set up are you running in that in the pictures?

Yep will fit, don't need excessive camber, but as has been said you'll need to roll the guards.

Here's mine with same spec wheels & tyres: Visit My Website

Running -1 deg camber up front and unknown in rear (just whatever camber came about from lowering it), had some rubbing at that ride height in the pics but none at what it is now (rear approx 10mm higher than pics and front maybe 15-20mm higher).

What suspension are you running?

so are those a zero offset wheel?

at this stage is just lowering springs but will be a set of adjustable coilovers, assuming that the wheels go on/fit.

will get the guards rolled once the wheels are on to keep it nice and close but just enough to clear the tyre.

will fit aslong as you have enough camber, will need a roll.

any idea how much camber? just want it to be as flush as possible

just curious does anyone know if 16x8's with a zero offset will fit on my e30 coupe? im thinking of running 195/45s dont mind rolling the guards but dont want to run any flares.

Thinking about getting rid of my 325M manual steering rack as my Mrs has trouble with it in car parks etc.

Will keep you in mind.

That'd be great thanks, would be happy to do some sort of swap if you wanted?

Hi everyone

if anyone has a manual steering rack to suit an e30 coupe which they would like to sell i have a good home for one.

not to worried about the condition as long as it is still usable

many thanks

thank you for the link, will make it much easier to have some guide lines to work with.