Garett

We talking 450hp at the wheels or the flywheel?

I just signed up to you tube... Ok its not pretty but heres a quick vid of one of the dyno runs.. http://www.youtube.com/watch?v=HKnufl1TOEM...eature=youtu.be

haha yeah standard as

Just the stock head gasket and head studs to worry about then Im interested to see how far it will go, but im going to leave it at that power for now just untill i build a fully forged one with arp hardware, then we'll be having some serious fun, but like i have said before that way way down the line

hahaha oww sweet then nothing to worry about

M52 rods

No idea?! Stock m52 rods and pistons and crank, you have any idea? Anyone know what that would be roughly at the flywheel??

That's what I thought Brent at dynopower tuned it, im not sure what type of dyno though

Ok I went with the plug and play option, turns out there is only 1 of the many different types of dme's available, it was slightly different pin out but with moving a few around it works fine. I purchased some siemens 875cc 80lbinjectors as the ones I had were to small Had a run up on the dyno today and putting down a very nice 419bhp on 95 octane then the fuel pump couldn't keep up, so taking out the 3.2l m3 evo pump and installing a bosch 044 pump and to alow for a bit of movement going to run it on 98 octane and see how we go.

That's all well and good, but why has the forum done this? Is it due to an update we did or the server or wat?? If you highlight the words Warning: date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Pacific/Auckland' for 'NZST/12.0/no DST' instead in /srv/bimmersport.co.nz/bimmersport.co.nz/www/htdocs/forums/init.php on line 269 And scroll the mouse down you can see the place to upload, still a pain

Yeah I heard that it was coming out, I hope the price comes down but not sure it will for the plug and play option.

Has anyone got a link g4 plug in ecu for m50 engine they want to sell?

Can do for 530i e60 front and rears 495+gst plus freight, cheers

Thanks mike a lot of time and effort has gone into it. Hoping to have some good updates soon

I cant posts pics on here anymore for some reason, I think I may have messed up the settings on here when I was pressing buttons. Some pics here... http://instagram.com/garett29

bump

Cheers josh but the radio is all sorted now was just not connecting at the radio behind the back seat, someone's been in there before me by the looks of all the broken clips everywhere, the sub I installed is awesome it gives it that little more bass and mid in the rear. Tinypic aye, ill have to look it up. I liked the system on here with all my pics already on here but I was playing with the settings now its all messed up. kinda why I haven't updated my project page on here, just sending it all to instagram.

For some reason I cant post pictures, says this where the attachments are... Warning: date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Pacific/Auckland' for 'NZST/12.0/no DST' instead in /srv/bimmersport.co.nz/bimmersport.co.nz/www/htdocs/forums/init.php on line 269 Anyway I got it working, there must be 4 speakers in the box, I cut and soldered the 8 wires into the 8 coming out of the amp and it works really well, theres a massive difference when plugged in compared to disconnected, very happy with the outcome.

Right I got another question, I got the factory sub box pt-65138360789 and am wanting to install it in my car. There is what looks to be 4 twin twisted wires running into it 3 yellow and one blue. any ideas on what id need to bridge them into to get it up and going?

Ok so I checked this and you are correct, ive tested all the wires and just as you described I could see the current fluctuate when pressing the on off button, so it was sending a signal. So I went and checked the connector pins at the radio module behind the back seat on the left and found one pins not seating correctly, a quick adjustment and the radio came to life :D I feel like I should have checked this earlier haha, oh well live and learn. Cheers Neal

Im wanting to get some super low springs for E39 Has anyone got anything?

Cheers neal, ill do this and report back

Yeah forgot to add, I tried that first, also none of my scanners will gain access to the radio.

I have the 4:3 but tried also the 16:9, still same issue

Ok so I purchased a E39 540i with a TV and sat nav, that seems to work fine but the radio wont turn on, no orange light or any sound what so ever. I've googled the hell out of the issue and been down many paths to find the problem but had no luck. Things I have done... Removed the radio unit and placed in another vehicle and confirmed it was good Checked fuses in glove box, RH of boot, engine bay in ECU box Remove and replace AMP Unit in LHR rear of boot Remove and replace CD changer in LHR of boot Remove and replace Aerial box in LHR of boot Remove and replace DVD nav unit Remove and replace Video module Remove and replace steering wheel with controls Remove and replace steering wheel clock spring Remove and replace ign switch assy Still having same issue, the one thing I haven't done yet is remove the drivers seat and check the fuses under the carpet. If anyone can shine some light on this it would be much appreciated