Garett

Here we have a set of 19" forged light weight 2 piece rims with almost new tyres, alot of tread left on them they will fit all BMW's apart from E39 5 series http://www.trademe.co.nz/motors/car-parts-accessories/wheels-tyres/alloy-wheels/auction-1086684657.htm

Just making it a bit easier to read 1 Series E81/82/87/88 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 35-45 3 Series E21 = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. ET 12-20 3 Series E30 = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. ET 15-35 3 Series E30 M3 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 27-30 3 Series E36 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-41 3 Series E36 M3 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 35-47 3 Series E46 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-47 3 Series E46 M3 = PCD 5x120 centre bore 72.5mm and M12x1.5 bolt thread. Fronts ET 30-47, Rears ET 20-27, 3 Series E90/91/92/93 = PCD 5x120, Centre bore 72.5mm and M12x1.5 bolt thread. ET 30-45 3 Series E90/92/93 M3 = PCD 5x120, Centre bore 72.5mm and M12x1.5 bolt thread. ET 34-37 5 Series E28 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 18-25 5 Series E34 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 13-20 5 Series E34 M5 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. 5 Series E39 = PCD 5x120, centre bore 74.0mm and M12x1.5 bolt thread. ET 15-25 5 Series E39 M5 = PCD 5x120, centre bore 74.0mm and M12x1.5 bolt thread. ET 15-25 5 Series E60/61 = PCD 5x120 centre bore 72.5mm and M12x1.5 bolt thread. ET 15-32 5 Series E60 M5 (Saloon) = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-32 5 Series E61 M5 (Touring) = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-32 6 Series E24 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. 6 Series E63/64 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 14-20 6 Series E63/64 M6 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-20 7 Series E32 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 19-26 7 Series E38 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 13-25 7 Series E65/66/67/68 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 15-25 8 Series E31 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. X3 E83 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 40-45 X5 E53 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 40-45 X5 E70 = PCD 5x120, centre bore 74.0mm and M14x1.25 bolt thread. ET 37-53 X6 E71 = PCD 5x120, centre bore FRONT 74.0mm, centre bore REAR 72.5mm and M14x1.5 bolt thread. Z1 E30Z = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. Z3 E36 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-40 Z3 M Coupe/M Roadster = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. Z4 E85 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 45-52 Z8 E52 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread.

Another good link to styles, offsets, weights and sizes for BMW factory wheels http://www.bmwstylewheels.com/

another to add http://www.willtheyfit.com/

Yes for track people say its no good with massive stretch but atm mines more of a drift monster lol, will be a dedicated track car soon though, so my cars arches will be getting the chop to make room for some really wide tread

Yeah panel beated the crap out of them, if I did it again I would just stick to 9" rear and front and run a 265 all round or something like that. Once you go 10's your limited on what ya can run with out cutting and flaring. Sweet so yours should in theory be as low as mine without adjusters in, the photo above I had adjusters in so would not rub

With the rear spring on your new BC golds, whats the measurement from end to end if its 160mm your car will be higher than factory, needs to be around 110 due to the weight reduction you have done. i had to send mine back and get one custom made by them, just a fyi

looking good man, ive had 18x10 under the rear with no rubbing. widest you can go is 235/40/18

Sure some one will want to take it to 1 million kms http://www.trademe.co.nz/Browse/Listing.aspx?id=812203672&ed=true

PLAYDAY AT HAMPTONS - 4 OCT - CAR GROUP NZ$135.00 Why not put your car through its paces at a Playday at Hamptons? There are a range of track days and groups to suit everyone’s driving ability. These days are controlled with a non-racing environment but with no speed restrictions! This gives you the opportunity to explore your car's performance on a safe, professional motorsport circuit. Almost any car is eligible to take part, so come and join us on the track! (Check eligibility at www.hamptondowns.com) Friends and family are welcome free of charge at this event. What you need for the day if your a car: A valid driver’s licence, overalls (clean 100% cotton or race overalls, helmet (available for hire on the day) and enclosed shoes. Anyone keen on this!? Saturday 4 October Full day Cars $135 for normal car group click here to register

Yup

Coming together nicely great job, ill be following this build looks like your doing a tidy job of it.

Hey guys Just having a bit of a clean-up around the place and have found some brand new BMW, Hella & Bosch lights 3x RHF E32 Driving light lens – 63171379108 – Hella | $75+GST Each (BMW RRP $193.83+GST) 3x LHF E32 Driving light lens – 63171379107 – Hella | $75+GST Each (BMW RRP $193.83+GST) 1x RHF E30 Driving light lens – 63171375068 – Hella | $75+GST (BMW RRP $189.04+GST) 3x LHF E28 Outer headlight lens – 63121369855 – Hella | $75+GST Each (BMW RRP $289.92+GST) 2x E24 Bumper mounted driving light lens – 63211468127 – Bosch | $35+GST Each Photos can be supplied if required

http://www.trademe.co.nz/Members/Listings.aspx?member=749702

Yeah there's a vid around of what happened, looking forward to seeing it.

Another awesome track day in taupo on Anzac day with no mechanical faults but I did however hit a truck tyre side ways and got a bit airborne, got my first dent and rear bumper damage

https://www.facebook.com/pages/GDM-GD-Motorsport/183893931682678?ref=hl

Hampton down last Friday for a drift session, was pretty fun a few spins but at the end had it pretty dialed in.. pics are on my facebook page. Next day will be 25th april in Taupo.

Hey guys, have a look at our new website we just got up and running if you can see anything that we could improve on or add to or change your input is valid, cheers guy's, I look forward to working with you with your parts requests and servicing soon. http://sdeuropean.co.nz/

What we do have in stock are Style's..... 9, 44, 58, 63, 176, 81, 18, 27, 28, 31, 33, 34, 43, 48, 46, 45, 166 http://www.bmwstylewheels.com/

We have 2 sets of style 97 for our race car, they come up every once and a while.

Remember the E65-66 is a very large car with big wheel arches

Yeah there pretty hard to find aye, they are 19x10 and 19x9, have a look at these two pics I think they look fricken awesome... just saying lol

Offset is 24 http://www.bmwstylewheels.com/bmw/95 Stud pattern 5x120 Im sure there will be someone out there who can re drill them to 5x114.3

Style 95's , will post more pics once they are off the car and cleaned and checked These look great on E46 and E39's and many others See this link . http://www.bmwstylewheels.com/bmw/95