mpdori 0 Report post Posted September 19, 2008 hey everyone, looking to put a new engine in my e30 any suggestion on what to go for and what will fit. does anyone no if its posissble to drop a lexus v8 in them, and how much modification needs to be done. thanks mark. Quote Share this post Link to post Share on other sites
savvi 0 Report post Posted September 19, 2008 hey everyone, looking to put a new engine in my e30 any suggestion on what to go for and what will fit. does anyone no if its posissble to drop a lexus v8 in them, and how much modification needs to be done. thanks mark. yes it can be done and has, theres a member on here thats done it aka Riley the more common swap is the m50/m52 motor from e36 or e34 or a m30 3.5 big six search projects or forum you should find Rileys car there somewere, his is a tidy lexus swap Quote Share this post Link to post Share on other sites
tibbs.james 1 Report post Posted September 20, 2008 Rolls Royce Merlin v12 ? but seriously there are heaps of cool engine swaps on here, couple of different SR20 swaps, i recall a thread about an RB20 Swap and there is even a member with a 2jZ E30 Of course Riley's lexus v8 E30 has been mentioned. you could Even go Mikes Route and Turbo your existing engine alongside mega squirt engine management. Quote Share this post Link to post Share on other sites
horsehead777 0 Report post Posted October 5, 2008 hey everyone, looking to put a new engine in my e30 any suggestion on what to go for and what will fit. does anyone no if its posissble to drop a lexus v8 in them, and how much modification needs to be done. thanks mark. I would go for SR20DET aye,,, It fitted without many prob on my mate's one.. goes BLOODY good/hard.. GUD LUCK Quote Share this post Link to post Share on other sites
pureboiracer 0 Report post Posted October 6, 2008 imo i would stick with the m20 engine. there bloody strong motors and have alot of potential. a set of forged rods and pistons. metal head gasket. o ringd block. maby stonger crank and a few other bits and peices and it would easily be good for 400hp and like 20psi or something silly Quote Share this post Link to post Share on other sites
kerrynzl 3 Report post Posted October 6, 2008 hey everyone, looking to put a new engine in my e30 any suggestion on what to go for and what will fit. does anyone no if its posissble to drop a lexus v8 in them, and how much modification needs to be done. thanks mark. Small Block Chevy mate, Can take it out to 7 litres [ 430 cubes ] the only hiccup is the distributor is at the back of the block, so you might need to gas-axe a hole in the firewall [ better still gas-axe out the whole firewall and recess the engine back] These ol'donkeys can really "haul ass" check this out... Quote Share this post Link to post Share on other sites
QuickSilver 0 Report post Posted October 7, 2008 "That sh*t is hauling ass!!!" Thats the coolest thing ive seen in a very long time. I want one ! Quote Share this post Link to post Share on other sites
mpdori 0 Report post Posted October 7, 2008 hey everyone thanks for all ur reply, i like the sound of just the m20 engine saves alot of stufing round, but alot of great ideas. i think i might take a look at some prices, or if anyone has done any of the conversions would be great to here wat it cost them roughly and how easy it was. cheers. Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted October 9, 2008 Best bang for buck with massive potential. 2JZGTE or 1JZGTE SR20DET are far too expensive. RB20DET's are gutless. You at least want the RB25DET from the RB family. Another interesting swap that I have not seen in the E30's yet would be the VQ30DET from the gloria. Massive motor though. Not sure it would fit. Quote Share this post Link to post Share on other sites
westy 614 Report post Posted October 9, 2008 Just a quiet note. I think you'll find its "duct" tape, not duck tape. Quote Share this post Link to post Share on other sites
OLLIE 26 Report post Posted October 9, 2008 Just a quiet note. I think you'll find its "duct" tape, not duck tape. haha very true, i missed that Quote Share this post Link to post Share on other sites
mpdori 0 Report post Posted October 9, 2008 haha very true, i missed that this is true haha even i missed that! il change it right away, cheers for the heads up. Quote Share this post Link to post Share on other sites
ED1RTY 2 Report post Posted October 9, 2008 While we are being pedantic its haven't not have'nt Quote Share this post Link to post Share on other sites
Nobimmer 694 Report post Posted October 9, 2008 Its still Duck Quote Share this post Link to post Share on other sites
320guy 0 Report post Posted October 9, 2008 imo i would stick with the m20 engine. there bloody strong motors and have alot of potential. a set of forged rods and pistons. metal head gasket. o ringd block. maby stonger crank and a few other bits and peices and it would easily be good for 400hp and like 20psi or something silly Its been done on stock internals before, 21~psi 480~whp Quote Share this post Link to post Share on other sites
pureboiracer 0 Report post Posted October 12, 2008 Its been done on stock internals before, 21~psi 480~whphow long did that last for? one run of the strip? Quote Share this post Link to post Share on other sites
CamB 48 Report post Posted October 12, 2008 how long did that last for? one run of the strip? www.e30tech.com - danmartin's build thread. Sold while still running fine. He did have about $5k of manifolds (intake and exhaust). Quote Share this post Link to post Share on other sites
kerrynzl 3 Report post Posted October 12, 2008 Just a quiet note. I think you'll find its "duct" tape, not duck tape. Being an expert in 100mph tape [ the racer variety ] , you are both correct. originally called Duct tape because it is used for air conditioner ducting in buildings. But the yanks have also marketed a brand of duct tape called "Duck Tape" [ it even has a cartoon picture of a duck on the roll ] Hey Gus! duct tape is better than a ballpeen hammer . you can use it for electrical repairs I have also seen duct tape used to fix steering components [ on a stockcar ] Quote Share this post Link to post Share on other sites
320guy 0 Report post Posted October 13, 2008 how long did that last for? one run of the strip? From my understanding it was quite reliable and he drove it quite alot. Quote Share this post Link to post Share on other sites
e30plz 1 Report post Posted October 13, 2008 (edited) Pfft 1JZ.. SR20.. If you're looking for power, Supercharged 1.6 M40's are where it's at. Edited October 13, 2008 by //James Quote Share this post Link to post Share on other sites
Forrest 35 Report post Posted October 13, 2008 man thats sick! i wana do that lol Quote Share this post Link to post Share on other sites
e30plz 1 Report post Posted October 13, 2008 (edited) Me too haha, The guy says it could keep up with a 320i. Edit: a 320i with "spaghetti exhaust, chiptuned, flowed head" Edited October 13, 2008 by //James Quote Share this post Link to post Share on other sites
Forrest 35 Report post Posted October 13, 2008 Me too haha, The guy says it could keep up with a 320i. Is it a guy in NZ? / linky / website/forum Quote Share this post Link to post Share on other sites
e30plz 1 Report post Posted October 13, 2008 Nah, In the Netherlands Quote Share this post Link to post Share on other sites
bravo 35 Report post Posted October 13, 2008 Me too haha, The guy says it could keep up with a 320i. Quote Share this post Link to post Share on other sites
