Old_Skool_Bmw 0 Report post Posted May 13, 2009 Wow, thanks for all the posts.. Yes it was hard waiting for so long But i knew the wait would be worth it. There are still a lot of things I would like to improve on/fix on the M3 but it will still take a long time yet to get it complete. When I get the scanner working I'll get the dyno plot posted up too. Think I have a fueling issue to sort.. Went through $50 of 98, so about 30Lts, in 80km's and i suspect it's dumping too much fuel (thanks Ian for helping me with some Q's:) ) Would this need to be sorted by a mechanic or a further dyno tune?? Laurence Quote Share this post Link to post Share on other sites
CamB 48 Report post Posted May 13, 2009 (edited) You should get it checked by someone who can plug into the Motec and can drive it around with a wideband oxygen sensor connected - measure the air fuel ratio (so you will know if its rich) and to check / troubleshoot why. For instance, it may be that the part throttle isn't well tuned, the temperature sender is telling the Motec its still in warmup mode, or a number of other things (eg fuel pressure problem). Don't drive it too much running excessively rich - its not good for a new engine. Edited May 13, 2009 by CamB Quote Share this post Link to post Share on other sites
Cale 36 Report post Posted May 13, 2009 That is one awesome M3 Laurence. Great stuff! Thanks for the write up. Quote Share this post Link to post Share on other sites
M3_Power 636 Report post Posted May 13, 2009 Very nice .. congrats .... and you are definitely one patient guy I have to say ... Quote Share this post Link to post Share on other sites
crazyarab 6 Report post Posted May 13, 2009 good great things take time! Awesome project man, love it. Quote Share this post Link to post Share on other sites
mark247 39 Report post Posted May 14, 2009 (edited) ****ing cool Edited May 14, 2009 by Mark247 Quote Share this post Link to post Share on other sites
Hi-Tek 3 Report post Posted May 18, 2009 (edited) Here you go Laurence, not sue if my emails made it to you mate. (dodgy cellphone pics) Edited May 18, 2009 by Hi-Tek Quote Share this post Link to post Share on other sites
Old_Skool_Bmw 0 Report post Posted May 18, 2009 just got the email before.. Thanks. going to take the pictures with me so the mechanic has something to work off. Looks really nice with the resonators, hope mine come up looking that good. Laurence Quote Share this post Link to post Share on other sites
Hi-Tek 3 Report post Posted May 18, 2009 No worries dude, have a look at all the pics I've sent you as you can see the places my fabricator cut and welded the old system. Make sure he welds the two resonators together also to stop any vibrating. Quote Share this post Link to post Share on other sites
Old_Skool_Bmw 0 Report post Posted June 29, 2009 No worries dude, have a look at all the pics I've sent you as you can see the places my fabricator cut and welded the old system. Make sure he welds the two resonators together also to stop any vibrating. Has been a busy 3 weeks lately. Just finished some important rust repairs on the bulkhead, caused by historic accident damage. Turned out to be a major fix but has been sorted now. M3 was dropped in to the mechanics today to fit the new resonators in the exhaust. Unfortunately 103.9dB at 4000rpm was too loud for the certifier Also having a small re-tune done as the engine is running a little too rich atm. Pics to come soon. Laurence Quote Share this post Link to post Share on other sites
Wervie67 0 Report post Posted July 2, 2009 nice work, 3 years is a long time any plans for a RHD conversion? Quote Share this post Link to post Share on other sites
ED1RTY 2 Report post Posted July 2, 2009 any plans for a RHD conversion? can i just ask.. Why? Quote Share this post Link to post Share on other sites
Wervie67 0 Report post Posted July 2, 2009 just curious really... some prefer to change, others not but after all those mods the bank proberbly wouldnt like it anyway Quote Share this post Link to post Share on other sites
ED1RTY 2 Report post Posted July 2, 2009 .. just don't see the point.. it would make the car worth less... E30 M3 = Meant to be LHD Quote Share this post Link to post Share on other sites
M3 Cab 0 Report post Posted July 2, 2009 I think the point in changing is so it can be registered Quote Share this post Link to post Share on other sites
ED1RTY 2 Report post Posted July 2, 2009 There are ways around that Doug Quote Share this post Link to post Share on other sites
Old_Skool_Bmw 0 Report post Posted July 2, 2009 nice work, 3 years is a long time any plans for a RHD conversion? No, not at this stage. I priced it up a short while ago but would be looking at between $10,000 - $15,000 for the conversion. Laurence Quote Share this post Link to post Share on other sites
Sammy J 1 Report post Posted July 3, 2009 Wow thats quite a bit, is that using all new parts or something? Quote Share this post Link to post Share on other sites
BMW POWER 2 Report post Posted July 3, 2009 Hey is it sweet if i come pick this up tommorrow? You ok with a 316i and $464.57 ay? Bloody beautiful car!! Quote Share this post Link to post Share on other sites
Old_Skool_Bmw 0 Report post Posted July 7, 2009 Hey is it sweet if i come pick this up tommorrow? You ok with a 316i and $464.57 ay? Bloody beautiful car!! Lol. $464.57 hmm if you move the . over a few spaces, Maybe $46457.00 Thanks Really can't wait to get her on the road this month. Should be finished in a few weeks. Just tidying up a few small things and will get a proper photo shoot done once it's finished. Laurence Quote Share this post Link to post Share on other sites
brockie123 31 Report post Posted July 7, 2009 don't convert it to RHD if it costs 15k it'l take 15k off what it's worth easy! Quote Share this post Link to post Share on other sites
Old_Skool_Bmw 0 Report post Posted July 11, 2009 M3 has just finished at being tuned after a small glitch was discovered.. stay tuned for video post of dyno run with figures Laurence Quote Share this post Link to post Share on other sites
Creaver 55 Report post Posted July 21, 2009 I'm waiting! (yes i've seen your post in the performance thread...but I want vids!!) Quote Share this post Link to post Share on other sites
martyyn 2 Report post Posted July 21, 2009 Sorry gang, the lack of vids is my fault. Laurence used my camera and Im just too busy with work at the moment to get them off the camera and onto here. Hopefully Ill get the chance on the weekend. Quote Share this post Link to post Share on other sites
hybrid 1043 Report post Posted July 21, 2009 Sorry only just saw this ... great work man. I know through grapevine how hard you've worked on this. Great to see a perfect build! Quote Share this post Link to post Share on other sites
